Candy CBW 57D1XE-80 User Manual

To reset the Candy CBW 57D1XE-80 washing machine, turn the dial to the off position, unplug the machine, wait for about 5 minutes, and then plug it back in. Select a new wash cycle and start the machine.
If your Candy washing machine is not spinning, check if the load is unbalanced, ensure the door is closed properly, and verify that the drain filter is not clogged. If the issue persists, inspect the belt and motor for any faults.
To clean the detergent drawer, remove it by pulling it out until it stops, then press the release lever. Wash the drawer under warm water and use a soft brush to remove any buildup. Reinsert the drawer once it is dry.
A loud noise during the wash cycle may be due to an unbalanced load, foreign objects in the drum, or worn bearings. Try redistributing the load and checking for any objects. If the noise continues, consider inspecting the bearings.
Regular maintenance includes cleaning the detergent drawer, checking and cleaning the filter, inspecting hoses for leaks or wear, and running an empty hot wash cycle with vinegar or a washing machine cleaner once a month.
To remove a blockage from the drain pump filter, locate the filter at the bottom front of the machine. Place a towel and a shallow dish under it, rotate the filter counterclockwise to remove it, clean out any debris, and then replace it securely.
The error code E03 indicates a drainage issue. Check the drain hose for kinks, ensure the pump filter is clear of debris, and make sure the drain hose is positioned correctly.
To select a quick wash cycle, turn the program dial to the quick wash option, typically labeled as "Rapid" or "Quick." Adjust additional settings if necessary, then press the start button to begin the cycle.
Yes, you can wash woolen clothes in the Candy CBW 57D1XE-80. Use the dedicated wool program, which is designed to gently clean wool garments at a lower temperature and spin speed.
If your Candy washing machine is leaking, check the door seal for damage, ensure the detergent drawer is not overfilled, inspect hoses for leaks, and verify that the drain pump filter is closed properly.