Candy CBW 48D2E-80 User Manual
![Candy CBW 48D2E-80 manual cover](/images/tXgBEQwEMIWIaCOpTWGejmaa/thumbs/thumb175x175.webp)
To reset the Candy CBW 48D2E-80, turn off the machine and unplug it from the power source. Wait for about 5 minutes before plugging it back in. This can help resolve minor technical glitches.
First, check the drain hose for any blockages or kinks. Also, inspect the pump filter for debris. If necessary, clean them to ensure proper drainage.
Remove the detergent drawer by pressing the release button. Soak it in warm soapy water, scrub with a soft brush, rinse thoroughly, and let it dry before reinserting it.
Leave the door open after each wash to allow the drum to dry. Regularly clean the rubber seal and drum with a mixture of vinegar and baking soda to prevent mold growth.
Ensure the washing machine is level by adjusting the feet. Check that the load is balanced and not overloaded. Remove any transport bolts if the machine is newly installed.
Check if the door is properly closed and latched. Ensure the power supply is connected and there is no delay start set on the machine.
Regularly clean the drum and detergent drawer. Check and clean the filter monthly. Inspect hoses for leaks or wear and replace them every 5 years.
Error code E03 indicates a drainage issue. Check the drain pump filter and hose for blockages. Clean them if necessary and restart the machine.
Use cold water cycles when possible and only run the machine with full loads. Additionally, select high-efficiency wash settings to save on energy.
Pause the cycle and check for any foreign objects in the drum or filter. Ensure the machine is level and the load is balanced. If noise persists, contact a technician.