Candy CBW 47D2E-80 User Manual
![Candy CBW 47D2E-80 manual cover](/images/fQPbaGacmceyPFBymTngJOYx/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry and add detergent. Next, turn the program selector knob to select your desired wash program. Press the 'Start/Pause' button to begin the cycle.
First, check if the drain hose is blocked or kinked. Ensure the filter is not clogged. If the problem persists, consult the manual or contact a service technician.
Remove the detergent drawer by pulling it out and pressing the release catch. Soak it in warm water and scrub with a brush to remove any residue. Dry thoroughly before reinserting.
Regularly clean the detergent drawer and filter, check and clean the door seal, and run an empty hot wash cycle with a washing machine cleaner to prevent buildup.
Ensure the machine is level and stable on the floor. Check that the load is evenly distributed inside the drum. Avoid overloading the machine.
Refer to the user manual to identify the error code. Follow the troubleshooting steps provided. If needed, reset the machine or contact customer support for assistance.
Yes, you can pause the wash cycle by pressing the 'Start/Pause' button. Wait for the door lock to release, add your laundry, then press 'Start/Pause' again to resume.
After selecting your wash program, press the 'Delay Start' button to choose the desired delay time. Confirm the setting and press 'Start/Pause' to activate the delay start function.
Check that the machine is plugged in and the power socket is working. Ensure the door is closed properly. Verify that the water supply is turned on.
Use cold water for washing whenever possible, wash full loads, and choose energy-efficient wash cycles. Regular maintenance also helps maintain efficiency.