Candy CBD 475D1E 1-80 User Manual

To start a drying cycle, first load your clothes into the drum. Close the door securely, select the desired drying program using the program selector dial, and press the start button.
Ensure the dryer is plugged in and the power outlet is working. Check if the door is closed properly. Also, make sure the start button is pressed firmly and the selected program is correct.
Open the dryer door and locate the lint filter, typically found at the bottom of the door opening. Pull it out, remove any lint by hand or using a soft brush, and replace it securely before starting another cycle.
Regularly clean the lint filter after every cycle. Check the venting system for obstructions monthly, and clean the dryer drum with a damp cloth to remove any residue.
This could be due to a clogged lint filter or venting system, overloading the dryer, or selecting an incorrect drying program. Clean the filter and vent, and ensure you are using the appropriate settings for the load size.
To reduce wrinkles, remove clothes promptly after the cycle ends. Use a lower heat setting and consider using the anti-crease function if available.
Check for any foreign objects in the drum or around the lint filter. Ensure the dryer is level and not overloaded. If the issue persists, it may require professional servicing.
It is not recommended to dry shoes in the dryer as it can cause damage to both the shoes and the dryer. Consider air drying or using a drying rack.
Refer to the user manual for the specific error code. Common solutions include resetting the dryer by unplugging it for a few minutes or checking for blockages in the venting system.
For optimal performance, do not exceed the maximum load capacity specified in the user manual, which is typically around 7 kg for this model. Overloading can affect drying efficiency and increase wear on the appliance.