Candy CB 13L8B-80 User Manual

To start a wash cycle, load your dishes into the dishwasher, add detergent to the dispenser, close the door securely, select the desired program using the control panel, and press the start button.
First, check the filter and drain hose for any blockages. Ensure the hose is not kinked. Clean the filter and remove any debris. If the problem persists, consult the user manual or contact a professional technician.
To clean the filter, remove the lower rack, twist the filter assembly counter-clockwise to remove it, rinse it under running water to remove debris, and then reassemble it back into the dishwasher.
Ensure the door is properly closed and latched. Check if the dishwasher is plugged in and the circuit breaker is not tripped. Verify the water supply is turned on. If none of these solve the issue, consult the service manual or contact support.
It is recommended to clean the filter and spray arms monthly, and perform a full clean of the interior every 3 months to maintain optimal performance.
Use only detergents specifically designed for automatic dishwashers. Avoid using regular dish soap as it can cause excessive suds and damage the appliance.
Open the rinse aid dispenser lid, adjust the dial to the desired setting using a coin or flathead screwdriver, and close the lid. Refer to the user manual for recommended settings based on water hardness.
Ensure that the spray arms can rotate freely, check that the filter is clean, verify the correct amount of detergent is used, and make sure dishes are loaded according to the manufacturer's guidelines.
To reset the dishwasher, turn off the appliance using the power button, wait a few seconds, and then turn it back on. If the problem persists, consult the troubleshooting section of the user manual.
Yes, you can wash plastic items, but ensure they are dishwasher-safe. Place them on the top rack away from the heating element to prevent warping or melting.