Candy AQUA 1042DE 2-S User Manual
![Candy AQUA 1042DE 2-S manual cover](/images/pXDkmrpzMebvuKinlAPXDSQP/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select the desired wash program using the control dial, and press the start button.
First, ensure that the machine is properly plugged in and that the door is fully closed. Check the fuse and circuit breaker. If the problem persists, refer to the user manual for troubleshooting tips or contact customer support.
Remove the detergent drawer by gently pulling it out. Wash it under warm water to remove any detergent residue. Use a soft brush for hard-to-reach areas and dry it before reinserting it into the machine.
Regularly clean the detergent drawer, check and clean the filter, and run an empty hot water cycle with a washing machine cleaner to remove any build-up. Ensure the door seal is dry to prevent mold.
Ensure the washing machine is level and on a stable surface. Check that the transit bolts have been removed. Also, avoid overloading the drum and evenly distribute the laundry.
Check for blockages in the drain hose and ensure it is not kinked. Inspect and clean the pump filter. If the issue continues, consult the user manual or contact a service technician.
Ensure the machine is level on the floor and the load is balanced inside the drum. Avoid overloading, and check for any foreign objects in the drum or pump filter.
It is recommended to clean the filter every month or if you notice the machine is not draining properly. Regular cleaning helps maintain optimal performance.
Yes, the Candy AQUA 1042DE 2-S has a delicate wash program designed specifically for fragile fabrics. Always check the garment care label before washing.
Run an empty wash cycle with hot water and a washing machine cleaner or white vinegar. Clean the door seal and leave the door open after use to allow the drum to dry and prevent odors.