Can-Am Outlander 850 DPS 2023 Operator's Guide

To break in your Can-Am Outlander 850 DPS 2023, operate the vehicle at varying speeds for the first 10 hours or 300 km (186 miles). Avoid full-throttle starts and rapid acceleration. This helps ensure proper engine and component wear-in.
The oil in the Can-Am Outlander 850 DPS 2023 should be changed every 100 hours, 1,000 km (621 miles), or every year, whichever comes first. Regular oil changes are crucial for maintaining engine performance.
The Can-Am Outlander 850 DPS 2023 requires unleaded gasoline with a minimum octane rating of 87 (RON+MON)/2. Using the correct fuel type helps maintain optimal performance and efficiency.
If your vehicle won’t start, check the battery connections, ensure the fuel tank is not empty, and inspect the fuses. If the problem persists, consult the user manual or a professional mechanic.
The recommended tire pressure for the Can-Am Outlander 850 DPS 2023 is 20 psi (138 kPa) for both front and rear tires. Maintaining proper tire pressure is essential for safety and handling.
For winter storage, clean the vehicle thoroughly, fill the fuel tank and add a fuel stabilizer, change the oil, and remove the battery. Store the vehicle in a dry, cool place to prevent damage.
If an overheating warning is displayed, stop the vehicle immediately, allow the engine to cool, and check the coolant level. If necessary, refill with the recommended coolant and inspect for leaks.
To adjust the suspension, locate the preload adjusters on the shocks. Turn them clockwise to increase preload and counterclockwise to decrease it. Adjust according to your riding preference and load.
Regular maintenance checks include inspecting brakes, checking fluid levels, examining tire condition and pressure, and inspecting the drive belt. Routine checks ensure the vehicle's reliability and safety.
To reset the maintenance reminder, turn the ignition on without starting the engine, navigate to the settings menu on the display, and follow the prompts to reset the reminder. Refer to the user manual if needed.