Can-Am DS 70 2017 Operator's Guide
![Can-Am DS 70 2017 Vehicle manual cover](/images/gzGSMmGdrFoojyPgokkhmoGQ/thumbs/thumb175x175.webp)
Ensure the vehicle is in neutral, turn the ignition key to the "ON" position, and press the start button while holding the brake.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol blends greater than 10%.
Change the oil every 50 hours of operation or at least once a year, whichever comes first.
The recommended tire pressure is 4 psi (27.5 kPa) for both the front and rear tires.
Check the battery charge, ensure the fuel valve is open, and verify that the kill switch is in the "RUN" position.
Clean the vehicle, change the oil, fill the gas tank, and add a fuel stabilizer. Disconnect the battery and store it in a cool, dry place.
Loosen the rear axle nuts, adjust the chain tensioner bolts equally on both sides, and then retighten the axle nuts.
Stop the vehicle, turn off the engine, and let it cool down. Check the coolant level and inspect for any leaks or blockages in the cooling system.
Remove the spark plug cap, use a spark plug wrench to unscrew the old plug, install the new plug, and reattach the cap. Ensure the new plug is correctly gapped.
Inspect the headlight bulbs for any damage, check the fuses, and ensure all wiring connections are secure. Replace any faulty components.