Can-Am DS 70 2010 Operator's Guide
![Can-Am DS 70 2010 Vehicle manual cover](/images/hQQSjRolIoKYohIitFpaaLex/thumbs/thumb175x175.webp)
The Can-Am DS 70 2010 requires unleaded gasoline with a minimum octane rating of 87.
It is recommended to change the oil every 50 hours of operation or every 6 months, whichever comes first.
The recommended tire pressure for the Can-Am DS 70 2010 is 4 psi for both the front and rear tires.
If your Can-Am DS 70 2010 is having starting issues, check the battery connections, ensure the fuel is fresh, and inspect the spark plug for fouling or wear.
Regular maintenance for the Can-Am DS 70 2010 includes checking and changing the oil, inspecting the air filter, checking the tire pressure, and ensuring the brakes are functioning properly.
To adjust the chain tension, loosen the rear axle nuts, adjust the tensioner bolts until the chain has the correct slack, and then retighten the axle nuts.
Use a high-quality 10W-40 4-stroke engine oil that meets or exceeds the manufacturer's specifications.
To replace the spark plug, remove the spark plug cap, use a spark plug socket to unscrew the old plug, check the gap on the new plug, and then install it by reversing the removal process.
While the Can-Am DS 70 2010 can handle mild wet conditions, it is advisable to avoid deep water and ensure that all electrical components are kept dry to prevent damage.
To store the Can-Am DS 70 2010 for the winter, clean the vehicle, change the oil, add fuel stabilizer to the gas tank, and keep the vehicle in a dry, covered area. Disconnect the battery to prevent discharge.