Can-Am DS 70 2018 Operator's Guide
![Can-Am DS 70 2018 Vehicle manual cover](/images/RKOCudsSOLPqJBBQQKCbExFn/thumbs/thumb175x175.webp)
To properly break in the engine, avoid full-throttle starts and rapid acceleration for the first 10 hours of operation. Gradually increase speed and periodically vary the RPM.
It is recommended to change the oil every 50 hours of operation or once a year, whichever comes first. Always use the recommended oil type and viscosity.
Check the basics: ensure the fuel valve is open, the engine stop switch is in the 'run' position, and the battery is charged. Also, verify that the spark plug is clean and properly connected.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol to prevent damage to the fuel system.
Loosen the rear axle nut, adjust the chain tensioner bolts on either side of the swingarm to achieve proper tension, and then retighten the axle nut. Ensure there is about 1 inch of slack in the chain.
Inspect the throttle cable for kinks or damage, and lubricate it if necessary. Ensure the throttle assembly is clean and free of debris. If the issue persists, consider replacing the throttle cable.
Regular maintenance such as keeping the air filter clean, using quality fuel, and ensuring the carburetor is properly tuned can improve performance. Consider upgrading the exhaust system for potential performance gains.
Common causes include low coolant levels, a blocked radiator, or a malfunctioning thermostat. Ensure that the cooling system is clean and free of obstructions.
Clean the vehicle thoroughly, change the oil, and fill the gas tank with fuel stabilizer. Disconnect the battery and store it in a cool, dry place. Cover the vehicle to protect it from dust and moisture.
The recommended tire pressure is 4 psi for the front tires and 4.5 psi for the rear tires. Always check the pressure when the tires are cold.