Can-Am DS 250 2017 Operator's Guide
![Can-Am DS 250 2017 Vehicle manual cover](/images/McolvDZddRqVOdnVkrWCCjTm/thumbs/thumb175x175.webp)
The recommended tire pressure for the Can-Am DS 250 2017 is typically 4 psi for the front tires and 4.5 psi for the rear tires. Always check the owner’s manual for specific recommendations.
It is recommended to change the oil every 50 hours of operation or at least once a year, whichever comes first. Consult the owner’s manual for detailed instructions.
Use a high-quality ethylene glycol antifreeze mixed with water in a 50/50 proportion. Make sure it is suitable for aluminum engines.
Check the battery for charge and connections, ensure the fuel is fresh, check the spark plug for fouling, and verify the ignition switch is working properly.
Remove the air filter, wash it with a mild soap and water solution, let it dry completely, and apply a light coat of air filter oil before reinstalling.
Loosen the rear axle nut, adjust the tension with the chain adjusters ensuring 1/2 inch of slack, and then tighten the axle nut. Refer to the service manual for detailed steps.
Stop the vehicle immediately, allow it to cool down, check the coolant level, inspect for any leaks, and ensure the radiator is clean and unobstructed.
Remove the spark plug wire, use a spark plug wrench to remove the old plug, install a new plug with the correct gap, and reconnect the wire.
Clean the ATV, change the oil, fill the fuel tank, add a fuel stabilizer, disconnect the battery, and store it in a dry, covered location.
Adjust the preload on the shocks, ensure the suspension components are lubricated, and consider upgrading to aftermarket shocks if necessary.