Bushnell LP520KB Instruction Manual
![Bushnell LP520KB Rangefinder manual cover](/images/qKlDaZhhVXwhoxJzjeqiZpBN/thumbs/thumb175x175.webp)
To calibrate the Bushnell LP520KB Rangefinder, power on the device and follow the instructions in the manual to adjust the settings. Ensure you are in an open area without obstructions for accurate calibration.
If the rangefinder is not turning on, check the battery compartment to ensure the batteries are properly installed and not depleted. Replace with new batteries if necessary, and ensure the contacts are clean.
Use a soft, lint-free cloth to gently wipe the lenses. If necessary, lightly dampen the cloth with a lens cleaning solution. Avoid using abrasive materials or excessive moisture.
Store the rangefinder in a cool, dry place, ideally in its protective case. Remove the batteries if you plan to store it for an extended period to prevent battery leakage.
To change the measurement units, access the settings menu on the rangefinder. Use the navigation buttons to select the units option and toggle between yards and meters.
Ensure that the lens is clean and free from obstructions. Check the environment for any reflective surfaces that might interfere with the laser. Recalibrate the device if necessary.
The Bushnell LP520KB Rangefinder is designed to be water-resistant, but it is not waterproof. Avoid using it in heavy rain to prevent damage. Use a protective cover if possible.
If the display is not functioning properly, try resetting the device by turning it off and on again. Check for any updates to the firmware and ensure the battery is fully charged.
The maximum range of the Bushnell LP520KB Rangefinder is approximately 1,000 yards, depending on the target's reflectivity and environmental conditions.
Check the Bushnell website or user manual for any announcements regarding firmware updates. You may also receive notifications if the rangefinder is connected to a compatible device.