Bushnell 11-0512 ImageView Instruction Manual
![Bushnell 11-0512 ImageView Binocular manual cover](/images/ixJfarivIbZpttnuDMbrktdU/thumbs/thumb175x175.webp)
To focus the Bushnell 11-0512 ImageView Binocular, first adjust the center focus wheel until the image appears sharp. Then, use the right eye diopter adjustment to fine-tune the focus for your right eye.
Ensure that the binoculars are properly focused before taking a picture. If the image is still blurry, check the camera settings for resolution and ensure the lenses are clean.
Use a soft, lint-free cloth slightly moistened with water or lens cleaner to gently wipe the lenses. Avoid using rough materials or harsh chemicals that could scratch or damage the lens coating.
The binoculars require two AAA batteries. To replace them, open the battery compartment located on the bottom of the binoculars, remove the old batteries, insert the new ones ensuring correct polarity, and close the compartment securely.
Use the included USB cable to connect the binoculars to your computer. The device should be recognized as a removable drive, allowing you to copy images directly to your computer.
Check if the batteries are correctly installed and have sufficient charge. If the problem persists, try replacing the batteries. If the issue continues, contact Bushnell support for further assistance.
The Bushnell 11-0512 ImageView Binoculars are not waterproof. Avoid using them in heavy rain or submerging them in water to prevent damage.
Ensure the binoculars are steady when taking a picture, preferably using a tripod. Also, ensure the lenses are clean and that you are using the highest resolution settings available on the device.
Yes, the binoculars have a tripod mount adapter located at the front of the hinge. Use a standard tripod to stabilize the binoculars for extended viewing or photography sessions.
Check the Bushnell website for any available firmware updates. Follow the provided instructions to download and install updates, ensuring the binoculars are connected to a computer via USB.