Bushnell 784550 Instruction Manual
![Bushnell 784550 Scope manual cover](/images/NkpVcrqNJVVbgbHakOvQUALu/thumbs/thumb175x175.webp)
To mount the Bushnell 784550 Scope, first ensure the rifle is unloaded. Secure the rifle on a stable surface, attach the scope rings to the scope, and then to the rifle's mounting base. Adjust for eye relief and level the crosshairs before tightening the ring screws evenly.
Use a soft, lint-free cloth to clean the lenses. Apply lens cleaner sparingly and avoid touching the lenses with fingers. Regularly check for dust and debris on the scope body, and store it in a protective case when not in use.
To adjust the focus, first ensure the scope is mounted securely. Look through the eyepiece and rotate the focus ring until the reticle is sharp and clear. Make incremental adjustments and recheck the clarity.
If the scope is fogging internally, it may be due to a seal failure. Ensure that all seals are intact and consider contacting Bushnell support for repair or replacement. For external fogging, use anti-fog wipes or solutions.
Check that the scope mounts and rings are properly tightened. Ensure there is no movement in the mounting system and verify that the rifle's recoil is not loosening the setup. Re-zero the scope if necessary.
Yes, the Bushnell 784550 Scope is designed for use in various lighting conditions. It features multi-coated optics to enhance light transmission, making it suitable for low-light environments.
To zero the scope, shoot a group at a target from a stable position. Adjust the windage and elevation turrets in the direction needed to move the point of impact to the desired location. Repeat until the scope is accurately zeroed.
Ensure the focus adjustment is set correctly for your eyesight. Also, check for any dirt or debris on the lenses that could affect clarity. Clean the lenses if necessary.
Yes, the Bushnell 784550 Scope is designed to be both waterproof and fog-proof, featuring O-ring seals and nitrogen purging to protect against moisture and fogging.
Store the scope in a cool, dry place away from direct sunlight. Use a protective case to prevent dust accumulation and potential damage. Avoid leaving it in excessively hot or humid conditions.