Bushnell 712060G Instruction Manual
![Bushnell 712060G Scope manual cover](/images/NlYZJTsWNskrGbNZfqogroIn/thumbs/thumb175x175.webp)
To mount the Bushnell 712060G Scope, ensure the rifle is stable and unloaded. Use the appropriate rings and bases, aligning them with the scope's mounting points. Tighten screws evenly to prevent misalignment.
Start by setting the scope's windage and elevation adjustments to the center. At 25 yards, fire a test shot and adjust accordingly. Repeat at 100 yards for final zeroing.
Use a lens brush to remove loose dirt, then apply a lens cleaning solution with a microfiber cloth to remove smudges. Avoid using abrasive materials.
Ensure that the scope's seals are intact to prevent moisture entry. If fogging occurs, allow it to acclimatize to surrounding temperatures before use.
Use the adjustable objective or side focus knob to bring the target into sharp focus. Adjust the eyepiece focus ring for reticle clarity.
Check for loose mounts or rings, ensure the rifle and scope are properly aligned, and verify that the internal adjustments are functioning correctly.
Use a padded case for the scope and rifle, secure all parts to prevent movement, and avoid placing heavy objects on top of the case.
Store the scope in a cool, dry place, ideally in a protective case. Avoid exposure to extreme temperatures and humidity.
Use a stable bench rest and target at a known distance, fire a group of shots, and compare the point of impact with the point of aim. Adjust as needed.
After exposure to rain or snow, thoroughly dry the scope with a soft cloth and inspect for any signs of moisture inside the lens. Store in a dry place.