Bushnell 202540 Instruction Manual

To turn on the Bushnell 202540 Rangefinder, press and release the power button located on the top of the device.
Ensure the rangefinder is powered on and the lens is clean. If it still doesn't display readings, check the battery and replace it if necessary.
Press and hold the mode button until the unit of measurement changes from yards to meters. This setting will be remembered even after the device is turned off.
The effective range of the Bushnell 202540 Rangefinder is approximately 5 to 1,000 yards, depending on the reflectivity of the target.
Use a soft, dry cloth to gently wipe the lenses. Avoid using any liquids or cleaning products that can damage the coatings.
Yes, the Bushnell 202540 Rangefinder is weather-resistant and can be used in light rain. However, avoid submerging it in water.
To replace the battery, open the battery compartment by twisting the cover counterclockwise. Remove the old battery and insert a new CR2 battery, ensuring the polarity is correct.
Ensure that the rangefinder is being used within its effective range and that you are aiming at a reflective target. Also, make sure the lens is clean and the device is steady when taking measurements.
To adjust the focus, rotate the eyepiece until the display and the target are both clear.
There is no specific reset function, but you can remove the battery for a few minutes to reset the device's settings.