Bushnell 202208 Instruction Manual
![Bushnell 202208 Rangefinder manual cover](/images/GyILjIQNbocXDxQfJMeFAfWc/thumbs/thumb175x175.webp)
The Bushnell 202208 Rangefinder does not require manual calibration. It is pre-calibrated from the factory. Ensure that you are using it on a stable surface and at a proper distance for accurate readings.
The Bushnell 202208 Rangefinder has a maximum range of 600 yards for reflective targets. The range may vary for non-reflective targets such as deer and trees, usually around 200-400 yards.
To change the unit of measurement, press and hold the mode button until you see the unit change on the display. Release the button once your desired unit is displayed.
The Bushnell 202208 Rangefinder uses a 9-volt alkaline battery. Ensure the battery is inserted correctly, with the positive and negative terminals aligned properly.
Use a soft, lint-free cloth to gently wipe the lenses. If necessary, use a lens cleaning solution specifically designed for optics. Avoid using paper towels or rough materials that could scratch the lenses.
Check if the battery is properly installed and has charge. Ensure the battery terminals are clean and free from corrosion. If the rangefinder still does not turn on, try replacing the battery with a new one.
Yes, the Bushnell 202208 Rangefinder is water-resistant and can be used in light rain. However, it is not waterproof, so avoid submerging it in water or using it in heavy downpours.
To ensure accurate measurements, hold the rangefinder steady and aim at the center of your target. Avoid aiming at reflective surfaces that could interfere with the laser measurement.
Ensure the lens and laser emitter are clean and free from obstructions. Check for low battery power, as it can affect performance. Also, verify that you are not aiming at highly reflective surfaces.
Store the rangefinder in a cool, dry place. Remove the battery if it will not be used for an extended period to prevent leakage. Keep the device in its protective case to avoid dust and damage.