Bushnell 202020 Instruction Manual

The Bushnell 202020 Rangefinder does not require manual calibration. It is designed to be accurate out of the box. Ensure the lenses are clean and the batteries are fresh for optimal performance.
First, check if the battery needs to be replaced. Ensure that the battery compartment is clean and that the battery is correctly installed. If the problem persists, contact Bushnell customer service.
Use a soft, dry cloth to gently wipe the lenses. For stubborn dirt, slightly dampen the cloth with water. Avoid using solvents or abrasive materials.
Press and hold the mode button until the display switches between yards and meters. This setting is saved even when the rangefinder is turned off.
The Bushnell 202020 Rangefinder has a maximum range of approximately 1000 yards, depending on the reflectivity of the target and environmental conditions.
Check for obstructions on the lenses and ensure they are clean. Also, verify that you are aiming at a reflective target. Environmental factors, such as fog or rain, can also affect accuracy.
Yes, the rangefinder can be used in low light conditions, but the display and target reflectivity might affect performance. Consider using it during dawn or dusk for better results.
The Bushnell 202020 Rangefinder uses a CR2 lithium battery. It is recommended to use high-quality batteries for best performance.
Center the reticle over the target while holding the rangefinder steady. Use both hands if necessary and ensure that your line of sight is not obstructed.
Yes, the Bushnell 202020 Rangefinder is water-resistant, which means it can withstand light rain and splashes. However, it should not be submerged in water.