Bushnell 200405 Instruction Manual

To change the battery, open the battery compartment located at the rear of the device, remove the old battery, and insert a new CR2 lithium battery. Ensure the polarity is correct.
Check the battery to ensure it is correctly installed and fully charged. If the device still does not turn on, try replacing the battery. If the issue persists, contact Bushnell customer support.
Use a soft, lint-free cloth to gently wipe the lenses. Avoid using any abrasive materials or cleaning solutions. A lens cleaning solution designed for optics can be used if necessary.
The Bushnell 200405 Rangefinder is water-resistant, but it is recommended to avoid prolonged exposure to heavy rain. Ensure all compartments are securely closed to prevent water ingress.
To switch units, press and hold the mode button until the unit indicator changes. Release the button when your preferred unit (yards or meters) is displayed.
The maximum range of the Bushnell 200405 Rangefinder is approximately 1,000 yards, depending on the reflectivity of the target.
A blurry display may be due to incorrect focus. Adjust the eyepiece until the display is clear. If the problem persists, ensure the lens is clean and free from obstructions.
The rangefinder is pre-calibrated by the manufacturer. If you suspect a calibration issue, verify measurements against a known distance. For further issues, consider professional servicing.
It is not recommended to store the rangefinder in extreme temperatures, such as those commonly found in a car. High heat or cold can affect the battery and electronic components.
Regularly clean the lenses and body with a soft cloth. Check the battery periodically and replace it as needed. Store the rangefinder in a cool, dry place when not in use.