Bushnell 118322 ImageView Instruction Manual
![Bushnell 118322 ImageView Binocular manual cover](/images/SCmxutYYWondPJUQwrgcJzCc/thumbs/thumb175x175.webp)
To set up your Bushnell 118322 ImageView Binocular for the first time, ensure the batteries are inserted correctly. Adjust the eyepiece and focus using the central focus knob until you have a clear image. Consult the user manual for detailed setup instructions.
Use a soft, lint-free cloth and lens cleaning solution to clean the lenses. Gently wipe in a circular motion to prevent scratches. Avoid using rough materials or excessive force.
If your binoculars are not turning on, check the battery compartment to ensure the batteries are inserted correctly and have sufficient charge. If the issue persists, try replacing the batteries.
Adjust the focus knob until the image becomes clear. Ensure the eyepieces are properly aligned with your eyes. If necessary, clean the lenses to remove any dirt or smudges that may be affecting clarity.
Connect the binoculars to your computer using a USB cable. The device should be recognized as a removable drive, allowing you to copy photos to your computer. Ensure any necessary drivers are installed.
The Bushnell 118322 ImageView Binocular uses standard AAA batteries. Ensure you use high-quality batteries to maximize performance and longevity.
The eyecups can be twisted up or down to accommodate eyeglass wearers or to adjust for comfort. Turn them until you achieve the best field of view without blackouts.
There is no specific reset button, but you can remove the batteries for a few minutes to reset the device. Reinsert the batteries and power on the binoculars to see if the issue is resolved.
Immediately dry the binoculars with a soft cloth. If they were submerged in water, remove the batteries and let the device air dry in a warm area. Avoid using heat sources like hair dryers.
Regularly clean the lenses and body with appropriate materials. Store in a dry, cool place and use the carrying case to protect from dust and impact. Check batteries periodically to prevent leakage.