Bushnell 11-8313 ImageView Instruction Manual

To adjust the focus, use the central focusing wheel located between the two barrels of the binoculars. Rotate the wheel until the image becomes sharp and clear. You may also need to adjust the diopter setting on the right eyepiece to compensate for differences between your eyes.
Ensure that the lenses are clean and free from smudges or dust. Use a soft, lint-free cloth to gently clean the lenses. If the problem persists, check the diopter setting and adjust it according to your vision.
To take a photo, make sure the binocular is powered on and then press the shutter button located on the top of the binocular. Ensure the subject is in focus before capturing the image.
Check if the batteries are correctly installed and have sufficient charge. Replace with new batteries if necessary. If the issue persists, inspect the battery compartment for any corrosion or damage.
Connect the binocular to your computer using the provided USB cable. The device should be recognized as a removable drive, allowing you to access and transfer the photos to your computer.
The binocular uses two AAA alkaline batteries. Ensure to install them in the correct orientation as indicated in the battery compartment.
Use a soft, clean, lint-free cloth to remove dust and smudges from the lenses. Avoid using any chemical cleaners. Store the binocular in a protective case to prevent scratches.
No, the Bushnell 11-8313 ImageView Binocular is not waterproof. Avoid exposing it to rain or submerging it in water to prevent damage.
No, the Bushnell 11-8313 ImageView Binocular is designed primarily for capturing still images and does not support video recording.
Ensure that there is enough memory available and that the SD card is correctly inserted. If the issue persists, try formatting the SD card using the binocular's menu options, but make sure to back up any important data first.