Bushnell 11-1210 ImageView Instruction Manual

To focus the binocular, first adjust the central focusing wheel for clarity in the left eye. Then, close your left eye and adjust the right eyepiece diopter ring until the right eye is clear. Finally, adjust the central focusing wheel for both eyes together.
Ensure that the batteries are correctly installed and have sufficient charge. If the issue persists, try replacing the batteries with new ones. Check the battery compartment for any corrosion and clean if necessary.
Use the provided USB cable to connect the binocular to your computer. The device should appear as a removable drive, allowing you to access and transfer images. Ensure the camera is turned on during the transfer process.
Regularly clean the lenses with a soft, lint-free cloth and lens cleaner. Avoid touching lenses with fingers. Store the binocular in a cool, dry place and ensure it is protected from dust and moisture.
Adjust the interpupillary distance by bending the binoculars until you see a single circular field. Each user should also adjust the focus using the center wheel and diopter adjustment for their individual eyesight.
Ensure that the binoculars are properly focused before capturing images. Check that the camera lens is clean and free from smudges. Use a tripod or stabilize the binoculars to prevent shaking during image capture.
The Bushnell 11-1210 ImageView Binoculars are designed for daylight use and may not perform well in low-light conditions. Consider using during optimal lighting for best results.
To replace the batteries, open the battery compartment located on the bottom of the binocular. Remove the old batteries and insert new ones, ensuring correct polarity. Close the compartment securely.
Internal fogging indicates moisture ingress. Allow the binoculars to dry in a warm, dry place. Consider using silica gel packs during storage to prevent moisture buildup.
Regularly clean and maintain the binoculars, avoid exposure to extreme temperatures, and store them in a protective case. Ensure batteries are removed during prolonged periods of non-use to prevent leakage.