BMW R 850 RT 2002 Rider's Manual

To change the oil on your BMW R 850 RT 2002, start by warming up the engine to ensure the oil flows out smoothly. Turn off the engine and place the bike on its center stand. Remove the oil filler cap, place a drain pan under the engine, and remove the oil drain plug. Allow the oil to drain completely. Replace the drain plug and remove the oil filter using an oil filter wrench. Install a new oil filter, ensuring it's properly lubricated. Finally, refill the engine with the recommended type and quantity of oil, and check for any leaks.

The recommended tire pressure for the BMW R 850 RT 2002 is typically 36 psi for the front tire and 42 psi for the rear tire. Always check the owner's manual or the tire information label on the motorcycle for the most accurate specifications.

Start by checking the battery connections to ensure they are clean and tight. Verify the battery's charge level and condition. Inspect the fuses and replace any that are blown. Check for any loose or corroded wires in the wiring harness. If the problem persists, use a multimeter to test the electrical components and consult the service manual for detailed troubleshooting procedures.

To adjust the suspension on your BMW R 850 RT 2002, locate the preload adjuster for the rear shock absorber, usually a knob or a screw. Turn it clockwise to increase preload for a firmer ride or counterclockwise for a softer ride. For the front suspension, you may need to adjust the fork preload using a spanner. Always refer to the owner's manual for specific instructions and recommended settings based on your riding conditions and weight.

Regular maintenance for your BMW R 850 RT 2002 should include oil and filter changes, checking and maintaining proper tire pressure, inspecting brake pads and fluid levels, lubricating the chain, checking the coolant level, and inspecting the electrical system. It's also important to regularly check the condition of the air filter and replace it as necessary. Refer to the service manual for a detailed maintenance schedule.

To replace the brake pads on your BMW R 850 RT 2002, first, remove the caliper mounting bolts and slide the caliper off the brake disc. Carefully remove the old brake pads and inspect the caliper for any damage or wear. Insert the new brake pads, ensuring they are properly aligned. Reattach the caliper to the brake disc and secure it with the mounting bolts. Finally, pump the brake lever a few times to seat the new pads properly.

If your BMW R 850 RT 2002 won't start, check the battery condition and charge if necessary. Ensure the kill switch is in the "run" position and the bike is in neutral. Verify that the fuel valve is open if applicable. Check the fuses for any that may be blown. If the problem persists, inspect the spark plugs and replace them if worn or fouled. If none of these steps resolve the issue, consult a professional mechanic.

To store your BMW R 850 RT 2002 for the winter, start by cleaning the motorcycle thoroughly to remove any dirt or debris. Change the oil and filter to prevent contaminants from sitting in the engine. Fill the fuel tank and add a fuel stabilizer to prevent fuel degradation. Disconnect the battery and store it in a cool, dry place. Inflate the tires to the recommended pressure and consider using a motorcycle cover to protect it from dust and moisture.

To improve the fuel efficiency of your BMW R 850 RT 2002, ensure regular maintenance such as oil changes and air filter replacements. Keep the tires properly inflated and avoid aggressive acceleration and braking. Reducing excess weight on the bike and ensuring proper chain lubrication can also contribute to better fuel economy. Consider using high-quality fuel to optimize engine performance.

The BMW R 850 RT 2002 typically requires a high-quality synthetic motor oil with a viscosity rating of 15W-50 or 20W-50, depending on the climate and operating conditions. Always refer to the owner's manual for the most accurate oil specifications and recommendations.