BMW R 18 Roctane 2022 Rider's Manual

The recommended tire pressure for the BMW R 18 Roctane 2022 is 36 psi for the front tire and 42 psi for the rear tire. Always check the tire pressure when the tires are cold.
It is recommended to service your BMW R 18 Roctane 2022 every 6,000 miles or annually, whichever comes first. This includes oil changes, brake checks, and overall inspections.
The best oil for the BMW R 18 Roctane 2022 is SAE 15W-50 synthetic motorcycle oil. This ensures optimal performance and longevity of the engine.
To adjust the suspension on your BMW R 18 Roctane 2022, refer to the owner's manual for detailed instructions. Typically, you can adjust the preload and damping settings using the tools provided in the motorcycle's toolkit.
If your BMW R 18 Roctane 2022 does not start, check the battery terminals for corrosion, ensure the kill switch is in the 'run' position, and verify that there is sufficient fuel. If the issue persists, consult a BMW service center.
To clean and maintain the chrome parts of your BMW R 18 Roctane 2022, use a non-abrasive chrome cleaner and a soft cloth. Regular cleaning prevents rust and keeps the chrome shining.
To store your BMW R 18 Roctane 2022 for the winter, fill up the fuel tank, add a fuel stabilizer, clean and lubricate the chain, and remove the battery to store it in a cool, dry place. Cover the motorcycle to protect it from dust and moisture.
To improve fuel efficiency, ensure your BMW R 18 Roctane 2022 is regularly serviced, keep the tires properly inflated, and avoid rapid acceleration and braking. Riding at a steady speed can also enhance fuel economy.
For breaking in a new BMW R 18 Roctane 2022, avoid full throttle accelerations and vary the engine speed for the first 600 miles. After this period, perform the first service to ensure all components are properly adjusted.
To replace the headlight bulb on your BMW R 18 Roctane 2022, first remove the headlight cover, then disconnect the wiring harness. Remove the old bulb and insert a new one, ensuring not to touch the glass part with your fingers. Reconnect the wiring and replace the cover.