BMW R 1250 RS 2022 Rider's Manual

To perform an oil change, ensure the engine is warm. Place the motorcycle on a stand, remove the oil drain plug, and let the oil drain completely. Replace the oil filter and reinstall the drain plug. Finally, refill with the recommended engine oil.
The recommended tire pressure for the BMW R 1250 RS 2022 is 36 psi for the front tire and 42 psi for the rear tire. Always check the pressure when the tires are cold.
If your motorcycle has starting issues, check the battery charge and connections, inspect the fuses, and ensure the fuel supply is adequate. If problems persist, consult a BMW service center.
To adjust the suspension settings, refer to the electronic suspension adjustment (ESA) system. Use the handlebar controls to select the desired mode such as Road, Dynamic, or Custom to suit your riding preference.
The BMW R 1250 RS 2022 should have regular maintenance checks every 6,000 miles or annually, whichever comes first. This includes oil changes, brake inspections, and general system checks.
To connect your smartphone, activate Bluetooth on both the phone and motorcycle. Use the menu button on the handlebar to navigate to the Connectivity settings and pair your device with the BMW Motorrad TFT display.
If the motorcycle overheats, stop riding immediately and let the engine cool down. Check the coolant level and fan operation. If the issue persists, contact a BMW service center for further diagnosis.
To replace the brake pads, remove the caliper, take out the old brake pads, and insert new ones. Ensure the new pads are properly seated and reinstall the caliper. Test the brakes before riding.
For winter storage, clean the motorcycle thoroughly, fill the tank with fuel and add a stabilizer, disconnect the battery, and cover the bike with a breathable cover. Store in a dry, temperature-controlled environment.
To reset the service light, you will need a BMW diagnostic tool or visit a BMW dealership. The service reset involves accessing the motorcycle's electronic system to clear the service message.