BMW R 1200RS 2017 Rider's Manual
![BMW R 1200RS 2017 Motorcycle manual cover](/images/bvsDZwMaFNYMrROLDPcFxzFN/thumbs/thumb175x175.webp)
To perform an oil change, ensure the engine is warm, place the bike on its center stand, and remove the drain plug to let the oil drain. Replace the oil filter, reinstall the drain plug, and refill with the recommended oil type and amount.
The recommended tire pressure for the BMW R 1200RS 2017 is 36 psi for the front tire and 42 psi for the rear tire.
To reset the service light, you will need a compatible diagnostic tool. Connect it to the motorcycle's diagnostic port and follow the tool’s instructions to reset the service reminder.
Use a high-quality ethylene glycol-based antifreeze with corrosion inhibitors for aluminum engines. It's best to use the coolant type recommended in the owner's manual.
To improve fuel efficiency, maintain proper tire pressure, use high-quality fuel, perform regular maintenance, and avoid aggressive acceleration and braking.
Check the battery connections and charge if necessary, ensure the kill switch is in the 'run' position, verify fuel levels, and check for any error codes on the display.
Brake pads should be inspected every 6,000 miles and replaced if the thickness is less than 2mm. Replacement frequency can vary based on riding style and conditions.
Use a chain cleaner and brush to remove grime, then apply a suitable chain lubricant while turning the rear wheel to ensure even distribution. Avoid over-lubricating.
Start by checking the battery voltage, inspect fuses, and look for any loose or corroded connections. Use a multimeter to test component functionality.
Valve clearance should be checked every 12,000 miles as part of regular maintenance to ensure optimal engine performance.