BMW M 1000 RR 2022 Rider's Manual

To properly break in your BMW M 1000 RR 2022, avoid high RPMs and extreme loads for the first 600 miles. Gradually increase the engine speed and load. After 600 miles, have a certified BMW technician perform the initial service.
Follow the BMW maintenance schedule which typically includes regular oil changes every 6,000 miles, chain checks every 1,000 miles, and comprehensive inspections every 12,000 miles. Consult your owner's manual for detailed intervals.
If your engine won't start, check the battery charge, ensure the kill switch is in the 'run' position, and verify the fuel level. If the issue persists, inspect the fuses and spark plugs. Consult a mechanic if necessary.
For optimal performance, maintain a tire pressure of 36 psi in the front tire and 42 psi in the rear tire. Always check the pressure when the tires are cold.
To adjust the suspension for track use, increase the preload and compression damping for a firmer setup. Adjust rebound damping according to the track's surface and your riding style.
Use a high-quality synthetic motor oil with a viscosity rating of 5W-40, meeting the API SJ / JASO MA2 standards for the BMW M 1000 RR 2022.
To improve fuel efficiency, maintain proper tire pressure, use the correct oil, avoid aggressive acceleration, and keep the engine properly tuned. Regular maintenance is key to optimal fuel efficiency.
If the ABS warning light remains illuminated, check the ABS sensors and brake fluid level. If no issues are found, have a professional diagnostic performed to check the ABS module.
Brake pads should be inspected every 6,000 miles and replaced if the pad thickness is less than 2mm or if you experience decreased braking performance.
Clean the chain with a suitable chain cleaner and a soft brush, then rinse and dry it thoroughly. Apply a high-quality chain lubricant while turning the wheel to ensure even coverage. Perform this maintenance every 500 miles or after riding in wet conditions.