BMW K 1200 R 2004 Rider's Manual

The recommended tire pressure for the BMW K 1200 R 2004 is 36 psi for the front tire and 42 psi for the rear tire.
It is recommended to change the oil every 6,000 miles or once a year, whichever comes first.
The BMW K 1200 R 2004 typically requires a high-quality synthetic motor oil with a viscosity rating of 10W-40.
Check the battery charge, inspect the starter motor, and ensure the fuel pump is functioning properly. Additionally, verify that the kill switch is in the 'run' position.
Regular maintenance tasks include oil changes, brake fluid replacement, tire pressure checks, chain lubrication, and air filter inspection.
The suspension can be adjusted using the preload and damping settings located on the front forks and rear shock. Consult the owner's manual for specific adjustment procedures based on riding conditions and weight.
If the engine overheats, stop the motorcycle immediately, turn off the engine, and allow it to cool. Check the coolant level and inspect for any leaks or obstructions in the radiator.
To replace the brake pads, remove the caliper mounting bolts, slide out the old pads, and insert new ones. Be sure to check the brake fluid level and test the brakes before riding.
A high-quality ethylene glycol-based coolant mixed with distilled water in a 50:50 ratio is recommended for the BMW K 1200 R 2004.
The air filter should be inspected every 12,000 miles and replaced if necessary, or as part of the regular maintenance schedule outlined in the owner's manual.