BMW F 850 GS Adventure 2020 Rider's Manual
![BMW F 850 GS Adventure 2020 Motorcycle manual cover](/images/EWRpTZaEjRHEEsqfozaVIaMN/thumbs/thumb175x175.webp)
To perform an oil change, start by warming up the engine to ensure the oil flows out smoothly. Remove the skid plate to access the oil drain plug. Place an oil pan underneath and remove the drain plug using a 10mm Allen wrench. Allow the old oil to drain completely, then replace the drain plug and tighten it to 32Nm. Replace the oil filter and fill the engine with 3.95 liters of new oil. Ensure you use oil that meets the BMW specifications.
The recommended tire pressure for the BMW F 850 GS Adventure 2020 is 36 psi (2.5 bar) for the front tire and 42 psi (2.9 bar) for the rear tire when riding solo. Always check tire pressures when the tires are cold.
To reset the service light, you will need a third-party diagnostic tool such as a GS-911 or MotoScan app. Connect the tool to the motorcycle's diagnostic port, follow the instructions to access the service menu, and reset the service reminder.
Use a high-performance coolant that is nitrite-free and suitable for aluminum engines. BMW recommends using their own branded coolant or any equivalent that meets the specification ASTM D3306.
To adjust the chain tension, place the motorcycle on its center stand. Loosen the rear axle nut slightly. Adjust the tension by turning the adjuster bolts on both sides of the swingarm equally. The correct chain slack is 35-45mm. Once adjusted, tighten the axle nut to 100Nm.
If the engine won't start, check the following: ensure the kill switch is in the 'run' position, confirm the bike is in neutral, check the battery charge level, inspect the fuel supply, and check the fuses. If these steps don't resolve the issue, consider consulting a BMW service center.
Regular service intervals are every 6,000 miles (10,000 km) or annually, whichever comes first. This includes checking the engine oil, brakes, tires, and overall system diagnostics. Refer to the owner's manual for detailed service requirements.
If the motorcycle overheats, pull over safely and turn off the engine. Allow it to cool down. Check the coolant level and for any leaks. Ensure the radiator is not blocked. If the issue persists, have the cooling system checked by a professional.
To improve fuel efficiency, maintain a steady speed, avoid rapid acceleration and braking, ensure regular maintenance, keep tires inflated to the correct pressure, and avoid carrying unnecessary weight.
To replace the brake pads, remove the caliper mounting bolts and slide the caliper off the disc. Remove the old brake pads and insert the new ones, ensuring they are correctly seated. Reattach the caliper and tighten the bolts to the specified torque. Test the brakes before riding to ensure proper function.