BMW F 850 GS 2019 Rider's Manual

To perform an oil change, warm up the engine, place the bike on the center stand, remove the oil drain plug and oil filter, allow oil to drain, install a new oil filter, replace the drain plug, and refill with the recommended oil type and quantity.
The recommended tire pressure for the F 850 GS 2019 is approximately 36 psi for the front tire and 42 psi for the rear tire. Always refer to the owner's manual for exact specifications.
To reset the service light, you will need a diagnostic tool such as the GS-911 or take the motorcycle to a BMW service center.
Check the battery charge and connections, ensure the kill switch is not engaged, verify there's fuel in the tank, and inspect the fuses. If the problem persists, consult a professional mechanic.
It's recommended to lubricate the chain every 500 miles or after riding in wet conditions to ensure optimal performance and longevity.
Use a high-quality ethylene glycol-based coolant with corrosion inhibitors, free of nitrites and amines, and ensure it's mixed in a 50/50 ratio with distilled water.
The suspension can be adjusted using the preload and damping settings. Refer to the user manual for specific instructions on adjusting the front forks and rear shock absorber to suit your riding style and load.
Clean the motorcycle thoroughly, change the oil, fill the fuel tank, add a fuel stabilizer, disconnect the battery, put the bike on a stand, cover it, and store it in a dry place.
Check the battery voltage, inspect all fuses, examine wiring for visible damage, and ensure all connectors are secure. If problems persist, consult a professional technician.
Regular maintenance should be performed every 6,000 miles or 12 months, including oil and filter changes, valve clearance checks, brake fluid replacement, and general inspection.