BMW F 850 GS 2017 Rider's Manual
![BMW F 850 GS 2017 Motorcycle manual cover](/images/zNzizojbGzlRDgfvpOjmRmlE/thumbs/thumb175x175.webp)
The recommended tire pressure for the BMW F 850 GS 2017 is typically 36 psi for the front tire and 42 psi for the rear tire. However, it's always best to check the owner's manual or the tire information sticker on the motorcycle for the most accurate specifications.
To perform an oil change on the BMW F 850 GS 2017, you need to warm up the engine, place the bike on a stable stand, remove the oil drain plug, and replace the oil filter. Once drained, replace the drain plug, fill with new oil up to the recommended level, and check for leaks. Consult the owner's manual for specific oil type and capacity.
If the engine won't start, check the basics: ensure the kill switch is in the run position, the bike is in neutral, and the battery is charged. If the problem persists, check the fuel level and inspect the fuses. If none of these steps work, it might be necessary to consult a professional mechanic.
The chain on the BMW F 850 GS 2017 should be lubricated every 500 miles or sooner if you ride in wet or dusty conditions. Regular lubrication helps extend the life of the chain and sprockets. Use a high-quality motorcycle chain lubricant for the best results.
To adjust the suspension on the BMW F 850 GS 2017, locate the adjustment knobs on the front forks and rear shock. The settings can typically be adjusted for preload, compression, and rebound. Refer to the owner's manual for specific recommendations based on your riding style and load.
Signs of a failing clutch include slipping during acceleration, difficulty shifting gears, a spongy clutch lever feel, and unusual noises when engaging the clutch. If you experience any of these symptoms, it may be time to inspect and possibly replace the clutch components.
To improve fuel efficiency, maintain proper tire pressure, ensure regular engine maintenance, reduce excess weight, and ride smoothly by avoiding rapid acceleration and deceleration. Regularly check and replace the air filter if necessary to ensure optimal airflow.
The BMW F 850 GS 2017 requires a high-quality ethylene glycol-based coolant that is compatible with aluminum engines. It's important to use a coolant that meets or exceeds the specifications listed in the owner's manual.
To reset the service light, you generally need a diagnostic tool such as a GS-911 or take the motorcycle to an authorized BMW service center. The reset procedure involves connecting the tool to the bike's diagnostic port and following the instructions provided by the tool's software.
Common issues include electrical problems, such as faulty connectors or blown fuses, and fuel delivery issues. Address electrical problems by checking connections and replacing fuses as necessary. For fuel issues, inspect the fuel pump and filters. Regular maintenance and inspections can prevent many of these problems.