BMW F 800 ST 2007 Rider's Manual
![BMW F 800 ST 2007 Motorcycle manual cover](/images/ugpuzkeqyrEHcASUdBmKFLYl/thumbs/thumb175x175.webp)
The recommended oil type for the BMW F 800 ST 2007 is synthetic 15W-50 motorcycle oil. The oil capacity is approximately 3.0 liters when changing the oil and filter.
For starting issues, check the battery charge and connections, ensure the fuel pump is operational, inspect the ignition system, and verify that the kill switch is not engaged.
Common maintenance tasks include regular oil and filter changes, checking and adjusting tire pressure, inspecting brake pads and fluid, and lubricating the chain.
The air filter should be inspected every 10,000 kilometers and replaced if necessary, or at least every 20,000 kilometers.
To adjust the chain tension, loosen the rear axle nut, adjust the chain adjusters evenly on both sides, and ensure the chain slack is within the specified range (typically 30-40mm).
The service indicator can be reset using a compatible diagnostic tool that connects to the motorcycle’s OBD port, such as the GS-911.
The recommended tire pressure for the BMW F 800 ST 2007 is typically 36 psi for the front tire and 42 psi for the rear tire, but always confirm with the owner’s manual or tire placard.
To replace the spark plugs, remove the seat and fuel tank to access the engine. Remove the ignition coils, unscrew the old spark plugs, and install new ones with the correct gap setting.
If the ABS warning light stays on, check the ABS sensors and connections for damage or dirt, and ensure the wheel speed sensors are properly aligned. If the issue persists, consult a professional mechanic.
To improve fuel efficiency, ensure the motorcycle is regularly serviced, maintain correct tire pressure, avoid excessive idling and aggressive acceleration, and remove unnecessary weight.