BMW F 800 GS 2023 Rider's Manual
![BMW F 800 GS 2023 Motorcycle manual cover](/images/TTsRzcHyPyHdPOOapzAOsQMS/thumbs/thumb175x175.webp)
The recommended tire pressure for the BMW F 800 GS 2023 is 36 psi for the front tire and 42 psi for the rear tire. Always check the tire pressure when the tires are cold.
To perform an oil change, first warm up the engine to ensure the oil is warm. Turn off the engine and place the bike on a stable stand. Remove the oil filler cap, then the drain plug to let the oil drain into a suitable container. Replace the oil filter with a new one, reinstall the drain plug, and fill the engine with the recommended oil type and quantity.
The BMW F 800 GS 2023 requires an ethylene glycol-based antifreeze coolant. Ensure that it is a 50:50 mix with distilled water for optimal performance and protection.
To adjust the suspension for off-road riding, increase the preload on the rear shock absorber and soften the damping settings. Consult the owner's manual for specific adjustments based on your weight and riding conditions.
If the battery is dead, you can jump-start the motorcycle using jumper cables and another vehicle or use a portable jump starter. Ensure that the donor vehicle is turned off before connecting the cables. Alternatively, charge the battery using a compatible battery charger.
The air filter should be inspected every 6,000 miles and replaced every 12,000 miles or sooner if you ride in dusty conditions. Regular maintenance ensures optimal engine performance and fuel efficiency.
To clean the chain, place the motorcycle on a stand and use a soft brush to remove dirt and debris. Apply a chain cleaner, let it sit for a few minutes, then rinse with water. Dry the chain thoroughly and apply a suitable chain lubricant.
To reset the service light, turn the ignition on without starting the engine. Press and hold the trip button until the service icon appears. Release and immediately press the button again until the reset prompt appears. Confirm the reset by pressing the button once more.
Brake pads should be inspected every 6,000 miles and replaced when the pad material is worn to 2mm or less. Riding conditions and style can affect the wear rate, so regular inspections are important.
Before a long trip, check tire pressure, oil level, coolant level, brake fluid, lights, and the condition of the chain. Ensure that all luggage is securely fastened and that you have a toolkit and emergency supplies.