Contents

Table of contents
- [en] Instruction manual
  - ( Important safety information 5
  - ] Causes of damage 6
  - 7 Environmental protection 7
  - f Induction cooking 7
  - * Getting to know your appliance 9
  - 1 Operating the appliance 10
  - O Time-setting options 13
  - v PowerBoost function 14
  - A Childproof lock 14
  - k Wipe protection 15
  - b Automatic safety cut-out 15
  - Q Basic settings 16
  - [ Energy consumption indicator 17
  - t Cookware check 18
  - D Cleaning 18
  - { Frequently Asked Questions (FAQ) 19
  - 3 Trouble shooting 20
  - 4 Customer service 21
- 8 Intended use
  - Intended use
  - Read these instructions carefully. Please keep the instruction and installation manual, as well as the appliance certificate, in a safe place for later use or for subsequent owners.
  - Check the appliance after removing it from the packaging. If it has suffered any damage in transport, do not connect the appliance, contact the Technical Assistance Service and provide written notification of the damage caused, otherwise you will los...
  - This appliance must be installed according to the installation instructions included.
  - This appliance is intended for private domestic use and the household environment only. The appliance must only be used for the preparation of food and beverages. The cooking process must be supervised. A short cooking process must be supervised with...
  - This appliance is intended for use up to a maximum height of 4000 metres above sea level.
  - Do not use covers. These can cause accidents, due to overheating, catching fire or materials shattering, for example.
  - Do not use inappropriate child safety shields or hob guards. These can cause accidents.
  - This appliance is not intended for operation with an external clock timer or a remote control.
  - This appliance may be used by children over the age of 8 years old and by persons with reduced physical, sensory or mental capabilities or by persons with a lack of experience or knowledge if they are supervised or are instructed by a person responsi...
  - Children must not play with, on, or around the appliance. Children must not clean the appliance or carry out general maintenance unless they are at least 8 years old and are being supervised.
  - Keep children below the age of 8 years old at a safe distance from the appliance and power cable.
  - We advise that you exercise caution using or standing near an induction hob while it is in operation, if you wear a pacemaker or a similar medical device. Consult your doctor or the device manufacturer concenring its conformity or any possible incomp...
- ( Important safety information
  - Important safety information
  - : Warning
  - Risk of fire!
    - : Warning
  - Risk of burns!
    - : Warning
  - Risk of electric shock!
    - : Warning
  - Malfunction risk!
    - : Warning
  - Risk of injury!
- ] Causes of damage
  - Causes of damage
  - Caution!
  - Overview
  - You will find the most frequently caused damage in the following table:
    - Damage
    - Cause
    - Measure
- 7 Environmental protection
  - Environmental protection
  - In this section, you can find information about saving energy and disposing of the appliance.
    - Energy-saving advice
    - Environmentally-friendly disposal
  - Dispose of packaging in an environmentally-friendly manner.
- f Induction cooking
  - Induction cooking
  - Advantages of induction cooking
  - Induction cooking is very different from traditional cooking methods, as heat builds up directly in the item of cookware. This offers numerous advantages:
    - Cookware
  - Only use ferromagnetic cookware for induction cooking, such as:
  - To check whether your cookware is suitable for induction cooking, refer to the section on ~ "Cookware check".
  - To achieve a good cooking result, the ferromagnetic area on the base of the pan should match the size of the hotplate. If a hotplate does not detect an item of cookware, try placing it on another hotplate with a smaller diameter.
  - Some induction cookware does not have a fully ferromagnetic base:
    - Unsuitable pans
  - Never use diffuser hobs or pans made from:
    - Properties of the base of the cookware
  - The material(s) from which the base of the cookware is made can affect the cooking result. Using pots and pans made from materials that distribute heat evenly through them, such as stainless-steel pans with a three- layer base, saves time and energy.
  - Use cookware with a flat base; if the base of the cookware is uneven, this may impair the heat supply.
    - Absence of pan or unsuitable size
  - If no pan is placed on the selected hotplate, or if it is made of unsuitable material or is not the correct size, the power level displayed on the hotplate indicator will flash. Place a suitable pan on the hotplate to stop the flashing. If this takes...
    - Empty pans or those with a thin base
  - Do not heat empty pans, nor use pans with a thin base. The hob is equipped with an internal safety system. However, an empty pan may heat up so quickly that the "automatic switch off" function may not have time to react and the pan may reach very hig...
    - Pan detection
  - Each hotplate has a lower limit for pan detection. This depends on the diameter of the ferromagnetic area of the cookware and the material from which its base is made. For this reason, you should always use the hotplate that best matches the diameter...
- * Getting to know your appliance
  - Getting to know your appliance
  - You can find information on the dimensions and power of the hotplates in~ Page 2
    - The control panel
      - Controls
      - Indicators
      - Controls
  - Touching a symbol activates the respective function.
    - Note:
    - The hotplates
      - Hotplates
    - Residual heat indicator
  - The hob has a residual heat indicator for each hotplate. This indicates that a hotplate is still hot. Do not touch a hotplate while the residual heat indicator is lit up.
  - The following are shown depending on the amount of residual heat:
  - If you remove the cookware from the hotplate during cooking, the residual heat indicator and the selected heat setting will flash alternately.
  - When the hotplate is switched off, the residual heat indicator will light up. Even after the hob has been switched off, the residual heat indicator will stay lit for as long as the hotplate is still warm.
- 1 Operating the appliance
  - Operating the appliance
  - This chapter explains how to set a hotplate. The table shows heat settings and cooking times for various meals.
    - Switching the hob on and off
  - The main switch is used to switch the hob on and off.
  - To switch on: Touch the # symbol. An audible signal sounds. The indicator next to the main switch and the hotplate indicators light up. The hob is ready to use.
  - To switch off: Touch the # symbol until the indicator goes out. All hotplates are switched off. The residual heat indicator remains lit until the hotplates have cooled down sufficiently.
    - Notes
    - Setting a hotplate
  - Use the @ and A symbols to select the required heat setting.
  - Heat setting = lowest setting.
  - Heat setting = highest setting.
  - Every heat setting has an intermediate setting. This is marked with a dot.
    - Selecting a hotplate and heat setting
  - The hob must be switched on.
    - 1. Select the hotplate using the symbol for the relevant hotplate.
    - 2. Touch the @ or A symbol within 10 seconds. The following basic setting appears:
  - The heat setting is set.
    - Changing the heat setting
  - Select the hotplate and touch the @ or A symbol until the required heat setting appears.
    - Switching off the hotplate
  - Select the hotplate and then touch the @ or A symbol until appears.
  - The hotplate switches itself off and the residual heat indicator appears.
    - Notes
    - Chef's recommendations
      - Recommendations
      - Cooking table
  - The table shows which heat setting is suitable for each type of food. The cooking time may vary depending on the type, weight, thickness and quality of the food.
    - Heat setting
    - Cooking time (mins)
- O Time-setting options
  - Time-setting options
  - Your hob has two timer functions:
    - Programming the cooking time
  - The hotplate automatically switches off after the time that is set has elapsed.
    - Setting procedure:
      - 1. Select the hotplate and the required heat setting.
      - 2. Touch the 0 symbol. x lights up on the display for the hotplate. lights up on the timer display.
      - 3. Touch the @ or A symbol. The basic setting appears:
      - 4. Use the @ or A symbol to select the required cooking time.
  - After a few seconds, the time begins to elapse.
    - Note:
    - Changing or deleting the time
  - Select a hotplate. Touch the 0 symbol and use the @ or A symbols to change the cooking time, or set the time to .
    - Once the time has elapsed
  - The hotplate switches off. A warning signal sounds. The time program function lights up for 10 seconds in the display.
  - When the 0 symbol is pressed, the indications turn off and the beeping stops.
    - Notes
    - The kitchen timer
  - You can use the kitchen timer to set a time of up to 99 minutes.
  - This functions independently from the hotplates and from other settings. This function does not automatically switch off a hotplate.
    - Setting procedure
      - 1. Touch the 0 symbol repeatedly until the V indicator lights up. lights up on the timer display.
      - 2. Touch the @ or A symbol. The basic setting appears.
      - 3. Use the @ or A symbol to set the required time.
    - Changing or cancelling the cooking time
  - Touch the 0 symbol repeatedly until the V indicator lights up. Change or set the time to using the @ or A symbol.
    - Once the time has elapsed
  - A warning signal sounds. is displayed on the time program function display. After 10 seconds the indicators turn off.
  - When the 0 symbol is pressed, the indicators turn off and the beeping stops.
- v PowerBoost function
  - PowerBoost function
  - The PowerBoost function enables you to heat up large quantities of water faster than when using heat setting .
  - This function can always be activated for a hotplate, provided the other hotplate in the same group is not in use (see illustration). Otherwise, and will flash in the display for the selected hotplate; the heat setting will then be set auto...
    - Activate
      - 1. Select the hotplate.
      - 2. Touch the symbol.
    - Deactivating
      - 1. Select the hotplate.
      - 2. Touch the symbol.
      - Note:
- A Childproof lock
  - Childproof lock
  - You can use the childproof lock to prevent children from switching on the hob.
    - Activating and deactivating the childproof lock
  - The hob must be switched off.
  - To switch on: Touch the E symbol for approx. 4 seconds. The display lights up for 10 seconds. The hob is locked.
  - To switch off: Touch the E symbol for approx. 4 seconds. The lock is released.
    - Childproof lock
  - With this function, the childproof lock automatically activates when a hob is switched off.
    - Switching on and off
  - You can find out how to switch the automatic childproof lock on in the ~ "Basic settings" section
- k Wipe protection
  - Wipe protection
  - If you wipe over the control panel while the hob is switched on, settings may be altered. To avoid doing this, you can use the hob's "Lock control panel for cleaning" function.
  - To switch on: Touch the R symbol. An audible signal sounds. The control panel is locked for 35 seconds. You can now wipe over the surface of the control panel without altering any settings.
  - To deactivate: The control panel will be unlocked once 35 seconds have elapsed. To release the function early, touch the R symbol.
    - Notes
- b Automatic safety cut-out
  - Automatic safety cut-out
  - If a hotplate operates for an extended period and no settings are changed, the automatic safety shut-off is activated.
  - The hotplate stops heating. , and the residual heat indicator or flash alternately in the hotplate display.
  - When you touch any symbol, the display switches off. The hotplate can now be set again.
  - The point at which the safety shut-off becomes active depends on which heat setting has been set (after 1 to 10 hours). .
- Q Basic settings
  - Basic settings
  - The appliance has various basic settings. You can adapt these to suit your cooking habits.
    - Display
    - Function
    - To access the basic settings:
  - The hob must be off.
    - 1. Switch on the hob.
    - 2. Within ten seconds, touch and hold the E symbol for approximately four seconds.
    - Product information
    - Display screen
      - 3. Touching the E symbol again takes you to the basic settings.
      - 4. Touch the E symbol repeatedly until the required function is displayed.
      - 5. Then use the @ and A symbols to select the required setting.
      - 6. Touch the E symbol for at least four seconds.
  - The settings have been saved.
    - Leaving the basic settings
  - Turn off the hob with the main switch.
- [ Energy consumption indicator
  - Energy consumption indicator
  - This function indicates the total amount of energy consumed by this hob the last time it was used for cooking.
  - Once switched off, the energy consumption in kWh is displayed for 10 seconds.
  - The picture shows an example with an energy consumption of . kWh.
  - You can find out how to switch this function on in the section on ~ "Basic settings"
- t Cookware check
  - Cookware check
  - This function can be used to check the speed and quality of the cooking process depending on the cookware.
  - The result is a reference value and depends on the properties of the cookware and the hotplate being used.
    - 1. Place the cold cookware containing 200 ml of water on the centre of the hotplate the diameter of which best matches that of the base of the cookware.
    - 2. Go to the basic settings and select the setting .
    - 3. Touch the @ or A symbol. A flashes in the hotplate display.
  - Check the result using the following table:
    - Result
  - To activate the function again, select the @ or A symbol.
    - Notes
- D Cleaning
  - Cleaning
  - Suitable maintenance and cleaning products can be purchased from the after-sales service or in our e-Shop.
    - Hob
      - Cleaning
  - Always clean the hob after cooking. This will prevent food deposits from becoming burned on. Only clean the hob after the residual heat indicator has gone out.
  - Clean the hob with a damp dish cloth and dry it with a cloth or towel to prevent limescale build-up.
  - Only use cleaning agents that are suitable for this type of hob. Observe the manufacturer's instructions on the product packaging.
  - Never use:
  - Stubborn dirt is best removed with a glass scraper, available from retailers. Observe the manufacturer's instructions.
  - You can obtain a suitable glass scraper from customer services or through our online shop.
  - Using a special sponge for cleaning glass-ceramic hobs achieves a great cleaning result.
    - Potential marks
    - Note:
    - Hob surround
  - To prevent damage to the hob surround, observe the following instructions:
- { Frequently Asked Questions (FAQ)
  - Frequently Asked Questions (FAQ)
  - Using the appliance
  - Noises
  - Cookware
  - Cleaning
- 3 Trouble shooting
  - Trouble shooting
  - Usually, faults are small matters that are easy to eliminate. Please read the information in the table before calling the after-sales service.
    - Display
    - Possible cause
    - Solution
    - Notes
- 4 Customer service
  - Customer service
  - Our after-sales service is there for you if your appliance needs to be repaired. We will always find an appropriate solution, also in order to avoid after-sales personnel having to make unnecessary visits.
    - E number and FD number
  - Please quote the E number (product number) and the FD number (production number) of your appliance when contacting the after-sales service.
  - The rating plate bearing these numbers can be found:
  - The E-number can also be found on the glass surface of the hob. You can check the customer index (KI) and FD number by going to the basic settings. Look up section~ "Basic settings" for this.
  - Please note that a visit from an after-sales service engineer is not free of charge in the event of misuse of the appliance, even during the warranty period.
  - After-sales contact details for all countries can be found in the attached after-sales service directory.
    - *9001114678*

Blaupunkt 5IF84351 Instruction Manual

Pages 24

Year 0

Language(s)

of 24

Blaupunkt 5IF84351 Specification

The Blaupunkt 5IF84351 Hob is a state-of-the-art induction cooktop designed to combine efficiency with modern aesthetics. This hob features a sleek, frameless design with a smooth black ceramic glass surface, offering both elegance and ease of cleaning. It is powered by advanced induction technology, ensuring rapid heat generation and precise temperature control, which enhances cooking efficiency and safety. The 5IF84351 model includes four cooking zones, allowing simultaneous multi-pot cooking with varying power levels to accommodate different cooking requirements. Each zone is equipped with an individual booster function, enabling a significant increase in power for quick boiling or searing. The hob sports a user-friendly touch control interface, providing intuitive operation and easy access to a range of features, including a timer function for each zone and a child safety lock to prevent unintended use. A residual heat indicator alerts users when the surface is still hot, adding an extra layer of safety. The Blaupunkt 5IF84351 is designed with energy efficiency in mind, as induction cooking directly heats the cookware, minimizing energy waste. It is compatible with induction-ready cookware, ensuring optimal performance. The hob also includes a pan detection feature, automatically deactivating the zone if no pan is detected, further enhancing safety and energy efficiency. The Blaupunkt 5IF84351 Hob is an ideal choice for modern kitchens, offering a blend of convenience, safety, and style.

Blaupunkt 5IF84351 F.A.Q.

How do I unlock the child lock feature on the Blaupunkt 5IF84351 Hob?

To unlock the child lock, press and hold the lock key for approximately 3 seconds until the lock indicator light turns off.

What should I do if one of the cooking zones is not heating up?

Check if the hob is properly connected to the power supply and ensure that the correct zone is selected. If the problem persists, contact Blaupunkt customer support.

How can I clean the surface of the Blaupunkt 5IF84351 Hob?

Use a soft, damp cloth with mild detergent to clean the surface. Avoid using abrasive cleaners or sharp objects that might scratch the glass.

Can I use any type of cookware on the Blaupunkt 5IF84351 Hob?

For optimal performance, use cookware with a flat base and magnetic properties, such as stainless steel or cast iron, which are suitable for induction hobs.

Why does the hob make a buzzing noise when in use?

The buzzing noise is normal and is caused by the high-frequency electromagnetic field used in induction cooking. It may vary depending on the type of cookware being used.

How do I reset the Blaupunkt 5IF84351 Hob to its factory settings?

To reset the hob, turn off the power at the circuit breaker for a few minutes, then turn it back on. This will restore the hob to its default settings.

What is the best way to prevent scratches on the hob's surface?

Always lift cookware instead of sliding it across the hob's surface and use cookware with smooth bottoms. Regularly clean the hob to remove any particles that might scratch the surface.

How can I tell if the hob is still hot after cooking?

The hob is equipped with a residual heat indicator that remains lit until the surface has cooled down to a safe temperature.

What should I do if the hob displays an error code?

Refer to the user manual for the specific error code meaning and recommended action. If the issue is not resolved, contact Blaupunkt customer support for assistance.

How do I activate the boost function on the Blaupunkt 5IF84351 Hob?

To activate the boost function, select the desired cooking zone and press the boost button. The cooking zone will operate at maximum power for a limited time.