Blaupunkt 5DA17151AU Instruction Manual
![Blaupunkt 5DA17151AU manual cover](/images/lbamTWnVrIZeLpbcYZiBoRFj/thumbs/thumb175x175.webp)
To clean the Blaupunkt 5DA17151AU Hood, first ensure it's turned off and cool. Use a damp cloth with mild detergent to wipe the outer surface. For the filters, remove them and wash with warm, soapy water. Make sure the filters are completely dry before reinstalling.
To replace the light bulb, disconnect the hood from the power source. Remove the cover over the light bulb area, unscrew the faulty bulb, and replace it with a new one of the same type and wattage. Reattach the cover and reconnect the power.
Excessive noise may be due to loose parts or a clogged filter. Check that all screws are tightened and clean the filters. If the noise persists, consider consulting a technician as the motor might require servicing.
To increase suction power, ensure the filters are clean and unblocked. Check that the ductwork is not obstructed and that the hood is set to a higher fan speed.
Regular maintenance includes cleaning the filters every 2-3 months, checking and replacing light bulbs as needed, and inspecting the ductwork for obstructions annually.
To reset the filter indicator, press and hold the filter reset button for approximately 3 seconds until the indicator light turns off. Refer to the user manual for specific button location.
While it's possible to install the hood yourself, it is recommended to have it installed by a qualified professional to ensure proper setup and safe connection to the electrical system.
Check that the hood is properly connected to the power supply and that the circuit breaker hasn't tripped. If the unit still doesn't turn on, inspect the fuse and replace if necessary.
To adjust the fan speed, use the control panel on the hood. Press the fan speed button to cycle through the available speeds until you reach the desired setting.
Yes, the hood can be used in recirculation mode without ducting. Ensure the carbon filters are installed to neutralize odors, and follow the manual for proper setup instructions.