Belling IDW45 BEL IDW45 User Manual
![Belling IDW45 BEL IDW45 manual cover](/images/c6428dd825f85eaf9fa8e569/thumbs/thumb175x175.webp)
To reset the Belling IDW45 dishwasher, press and hold the start/cancel button for about 3 seconds until the lights on the control panel flash. Release the button and wait for the dishwasher to reset.
Check for blockages in the drain hose and filter. Ensure the drain hose is not kinked and the filter is clean. If the problem persists, there may be an issue with the pump that requires professional service.
Ensure that you are not overloading the dishwasher and that dishes are placed correctly. Check that the spray arms are not blocked and that you are using the correct detergent type and amount.
It is recommended to clean the filter every month to ensure optimal performance and prevent blockages.
Check for any loose items inside the dishwasher that may be rattling. Also, ensure that the spray arms are not obstructed. If noises persist, it might require professional inspection.
Ensure that the rinse aid dispenser is filled and that you are using the appropriate drying setting. Opening the door slightly after the cycle ends can also help with drying.
Check if the dishwasher is properly plugged in and that the circuit breaker has not tripped. If the problem continues, the control panel may need servicing.
Place larger items like pots and pans on the bottom rack, and delicate items like glasses and cups on the top rack. Ensure that items do not block the spray arms.
The residue is likely due to hard water. Use a rinse aid and ensure the water softener is set correctly if your model has one. Consider using a dishwasher cleaner to remove mineral deposits.
Regularly clean the filter and door seals. Run a cleaning cycle with a dishwasher cleaner or vinegar to remove any buildup. Ensure dishes are not left in the dishwasher for extended periods.