Behringer XENYX 1002FX Quick Start Guide

Pages 21

Year 2021

Language(s)

of 21

Behringer XENYX 1002FX Specification

The Behringer XENYX 1002FX is a compact audio mixer designed for small venues, home studios, and podcasting. It features ten inputs, including two mono channels with XLR microphone inputs and four stereo line inputs, catering to a variety of audio sources. The mixer is equipped with XENYX mic preamps that provide a 130 dB dynamic range and a bandwidth that extends from below 10 Hz to over 200 kHz, ensuring high-quality audio reproduction. Each mono channel includes a three-band EQ for precise tonal adjustments, allowing users to shape their sound with ease.

One of the standout features of the XENYX 1002FX is its built-in 24-bit digital effects processor, offering 100 presets that include reverb, delay, chorus, and other effects to enhance audio output. This makes it versatile for different audio applications. The mixer also includes a main mix output, control room outputs, and a headphone jack, offering flexible monitoring options. Each channel is equipped with a peak LED indicator to prevent clipping and ensure optimal signal levels. The mixer has a compact and durable design, making it easy to transport and suitable for live performances or studio sessions. Its intuitive layout and user-friendly controls make it accessible to both beginners and experienced audio engineers.

Behringer XENYX 1002FX F.A.Q.

How do I connect a microphone to the Behringer XENYX 1002FX?

To connect a microphone, plug an XLR cable from your microphone into one of the XLR inputs on the mixer. Ensure the gain is adjusted properly using the 'Gain' knob, and activate the 'Phantom Power' if using a condenser microphone.

What should I do if there is no sound coming from the mixer outputs?

Check that all cables are securely connected and that the 'Main Mix' faders are up. Ensure that the 'Mute' buttons are not engaged and that the channel and main volume levels are adequately set.

How can I apply effects to my audio using the Behringer XENYX 1002FX?

Select the desired effect using the 'Program' knob, then adjust the 'FX Send' knob on each channel you want the effect applied to. Use the 'FX to Main' knob to control the overall effect level in the main mix.

How do I perform a factory reset on the Behringer XENYX 1002FX?

The Behringer XENYX 1002FX does not have a factory reset option. To troubleshoot, manually reset settings by adjusting all knobs and faders to their default positions.

What maintenance is required for the Behringer XENYX 1002FX?

Keep the mixer dust-free by covering it when not in use. Regularly check and clean connections with a contact cleaner. Occasionally inspect for any loose knobs or faders.

How do I connect the mixer to a computer for recording?

Use a 2x RCA to 3.5mm cable to connect the 'Tape Out' on the mixer to the computer's line-in or audio interface inputs. Ensure your recording software is configured to use the correct input source.

Can I use the Behringer XENYX 1002FX as an audio interface?

The XENYX 1002FX itself does not function as an audio interface. You will need an external audio interface to connect it to a computer for digital recording.

How can I eliminate feedback from the mixer setup?

Position microphones away from speakers and reduce the gain and volume levels. Use a graphic equalizer to identify and lower the frequencies causing feedback.

What should I do if the effects are not working on the mixer?

Ensure the 'FX Send' knobs are turned up on the channels you want to apply effects to. Verify that the 'FX to Main' knob is also turned up, and check if the selected effect is active.

How do I set up monitor speakers with the Behringer XENYX 1002FX?

Connect your monitor speakers to the 'Control Room Out' jacks using suitable cables. Adjust the 'Control Room' volume knob to set the desired monitor level independently from the main mix.