Behringer B1200D-PRO Quick Start Guide

Pages 14

Year 2021

Language(s)

of 14

Behringer B1200D-PRO Specification

The Behringer B1200D-PRO is a professional-grade active subwoofer designed to deliver powerful low-frequency reinforcement for a variety of live and installed sound applications. This subwoofer features a 500-watt Class-D amplifier, which ensures high efficiency and robust output with minimal power consumption and heat generation. The B1200D-PRO is equipped with a 12-inch long-excursion transducer, engineered to provide deep, punchy bass with minimal distortion even at high sound pressure levels.

The frequency response of the B1200D-PRO ranges from 45 Hz to 180 Hz, allowing it to effectively complement full-range speaker systems by handling the low-end spectrum. Its integrated stereo crossover allows for seamless integration with other speakers, ensuring a balanced and coherent sound across the entire frequency range. The subwoofer also includes a phase switch and an adjustable high-cut filter, providing users with flexible control over the sound output to suit different acoustic environments and system configurations.

Constructed with durability in mind, the B1200D-PRO features a rugged enclosure made from high-quality plywood, which is both lightweight and resilient to the demands of touring and live performances. The exterior is finished with a hard-wearing black textured coating, offering further protection against the rigors of regular use. Connectivity is facilitated through professional-grade XLR inputs and outputs, ensuring reliable and interference-free signal transmission.

Overall, the Behringer B1200D-PRO is designed for ease of use and maximum performance, making it a versatile choice for musicians, DJs, and audio engineers seeking an affordable yet high-quality subwoofer solution.

Behringer B1200D-PRO F.A.Q.

How do I connect the Behringer B1200D-PRO to my audio system?

To connect the Behringer B1200D-PRO, use the XLR inputs to connect your audio source, such as a mixer or another speaker. Then, use the XLR outputs to connect the B1200D-PRO to additional speakers if needed. Ensure all connections are secure and power on the subwoofer.

What is the recommended crossover frequency for the B1200D-PRO?

The recommended crossover frequency for the Behringer B1200D-PRO is typically around 100 Hz to 120 Hz. This range provides a balanced sound by allowing the subwoofer to handle the low frequencies while your main speakers handle the mids and highs.

How can I troubleshoot a lack of sound from the B1200D-PRO?

If there is no sound from the B1200D-PRO, first check all cable connections to ensure they are secure. Verify that the power cable is connected and the unit is turned on. Check the volume levels on both the subwoofer and the source. If the problem persists, try using different cables or connect a different audio source to isolate the issue.

How do I adjust the volume on the Behringer B1200D-PRO?

To adjust the volume on the Behringer B1200D-PRO, use the Level knob located on the rear panel of the subwoofer. Turn the knob clockwise to increase the volume and counterclockwise to decrease it.

What maintenance is required for the B1200D-PRO?

Routine maintenance for the B1200D-PRO includes keeping the unit clean and dust-free. Occasionally inspect the cables and connections for wear or damage. Ensure adequate ventilation to prevent overheating. Periodically check for firmware updates on the Behringer website to keep the unit operating optimally.

Can the B1200D-PRO be used outdoors?

The Behringer B1200D-PRO can be used outdoors, but it should be protected from direct exposure to rain or moisture. Use appropriate covers or enclosures to protect the unit from environmental conditions. Ensure all connections are secure and weatherproof if necessary.

What should I do if the B1200D-PRO overheats?

If the B1200D-PRO overheats, first turn off the unit and disconnect it from the power source. Allow it to cool down in a well-ventilated area. Check for obstructions in the ventilation areas and remove any dust buildup. Ensure the subwoofer is not placed in direct sunlight or near heat sources. Once cooled, reconnect and power it on.

How can I improve the bass response of the B1200D-PRO?

To improve bass response, position the B1200D-PRO near a wall or corner to utilize natural acoustics for enhanced sound. Adjust the Level and Crossover Frequency knobs to fine-tune the output. Ensure the subwoofer is on a stable surface, and experiment with its placement to achieve the best sound quality.

What is the maximum SPL of the Behringer B1200D-PRO?

The maximum sound pressure level (SPL) of the Behringer B1200D-PRO is approximately 122 dB. This allows it to deliver powerful and clear bass suitable for various audio applications.

Is it possible to daisy chain multiple B1200D-PRO units?

Yes, it is possible to daisy chain multiple B1200D-PRO units. Use the XLR outputs on the back of one unit to connect to the input of the next unit. This setup allows you to expand your sound system by adding more subwoofers as needed.