Behringer ACX900 Quick Start Guide

To connect an external effects processor, use the FX Send jack on the ACX900 to send the signal to your processor. Connect the output of the processor back into the FX Return jack. Adjust the FX mix controls to integrate the effect into your sound.
First, check all cable connections and ensure the power is on. Verify the volume levels on both the ACX900 and your instrument. Inspect the mute button status and test with different cables or instruments to isolate the issue.
Regularly clean the exterior with a dry cloth, keep the vents free from dust, and store the unit in a dry environment. Periodically check all connections and cables for wear and tear.
Position the amplifier away from the microphone and use the feedback detection system to identify problematic frequencies. Adjust the equalizer settings and reduce gain if necessary.
Yes, the ACX900 can be used with an electric guitar. However, it is optimized for acoustic instruments, so you may need to adjust the EQ settings to suit an electric guitar.
Connect your first instrument or microphone to Channel 1 and the second to Channel 2. Use the channel-specific controls to adjust the volume, EQ, and effects independently for each channel.
The notch filter is used to eliminate specific feedback frequencies. Adjust the notch filter control to reduce feedback without drastically altering the overall tone of your instrument.
To achieve a warm sound, adjust the midrange and bass EQ settings. Use the on-board effects, such as reverb or chorus, to add depth and warmth to the sound.
It's recommended to service the ACX900 annually or whenever you notice a decline in performance. Regular maintenance ensures optimum functionality and prolongs the lifespan of the amplifier.
Check the FX level controls and ensure they are not turned down. Verify that the FX loop connections are correct. Restart the amplifier to reset the internal effects processor.