be quiet! Dark Rock 4 User Manual

be quiet! Dark Rock 4 Cooler manual cover

Pages 2

Year 0

Language(s)

of 2

be quiet! Dark Rock 4 Cooler Specification

The be quiet! Dark Rock 4 is a high-performance CPU cooler designed for users seeking exceptional cooling efficiency and quiet operation. It features a single tower layout with six advanced 6mm copper heat pipes optimized for rapid heat transfer. The cooler is equipped with a Silent Wings 135mm PWM fan, which incorporates a fluid-dynamic bearing and a smooth six-pole motor, ensuring ultra-quiet performance with minimal vibration. The fan's unique wave-contoured blades are engineered to enhance airflow while reducing noise.

The Dark Rock 4 boasts a cooling capacity of up to 200W TDP, making it suitable for overclocked and high-end processors. The heatsink is constructed with an array of aluminum fins coated in a ceramic black finish, which improves heat dissipation and adds to its aesthetic appeal. The top cover of the cooler is made from brushed aluminum, providing a sleek and modern look.

Installation of the Dark Rock 4 is made convenient with its user-friendly mounting kit, compatible with a wide range of sockets, including Intel LGA 1700, 1200, 115x, and AMD AM5, AM4, among others. The cooler's design allows for effective RAM compatibility, with an asymmetrical construction that provides clearance for memory modules with tall heatsinks.

Overall dimensions are compact, with a height of 159.4mm, ensuring that it fits in most standard ATX cases. The Dark Rock 4 delivers exceptional performance for users who demand silent operation without compromising on cooling efficiency, making it an ideal choice for gaming and professional systems where noise reduction and thermal management are critical.

be quiet! Dark Rock 4 Cooler F.A.Q.

How do I install the be quiet! Dark Rock 4 cooler on an AM4 socket?

To install the Dark Rock 4 on an AM4 socket, start by attaching the backplate to your motherboard. Then, position the mounting brackets and secure them. Finally, apply thermal paste to the CPU and attach the cooler by aligning it with the brackets and securing it with the included screws.

What is the recommended method for applying thermal paste with the Dark Rock 4?

The recommended method for applying thermal paste with the Dark Rock 4 is the pea-sized dot method. Place a small amount of thermal paste in the center of the CPU before mounting the cooler. This allows the paste to spread evenly under pressure.

How can I reduce noise from the Dark Rock 4 cooler?

To reduce noise, ensure that the cooler is mounted securely and that the fan is not obstructed by cables. Adjust the fan speed in the BIOS or use a fan controller to find a balance between cooling and noise.

What should I do if the Dark Rock 4 fan is not spinning?

If the fan is not spinning, first check the connection to the motherboard. Ensure it is securely attached to the correct header. If the connection is good, try a different fan header or test the fan on another system to rule out a faulty fan.

Can the Dark Rock 4 be mounted in different orientations?

Yes, the Dark Rock 4 can be mounted in different orientations depending on your case and motherboard layout. Ensure that the cooler does not obstruct memory slots and allows for adequate airflow.

What maintenance is required for the Dark Rock 4 cooler?

Regular maintenance includes cleaning dust from the heatsink and fan blades. Make sure to power off your system before cleaning and use compressed air or a soft brush to gently remove dust buildup.

Is it possible to replace the fan on the Dark Rock 4?

Yes, you can replace the fan on the Dark Rock 4. It uses standard mounting clips, so you can swap the fan with another 120mm fan if needed. Ensure compatibility with the heatsink before purchasing a replacement fan.

How do I ensure proper airflow with the Dark Rock 4 cooler installed?

Ensure that the cooler's fan is oriented to push air towards the rear exhaust of your case. Arrange case fans to create a front-to-back airflow path, and avoid obstructing airflow with cables or other components.

What should I do if temperatures are higher than expected with the Dark Rock 4?

Check that the cooler is mounted properly with even pressure on the CPU and that thermal paste is applied correctly. Verify that your case has adequate airflow and that the fan is operating at optimal speeds.

Can I use the Dark Rock 4 cooler for overclocking purposes?

Yes, the Dark Rock 4 is capable of handling moderate overclocking due to its high cooling capacity. Monitor temperatures closely and ensure your case has good airflow to maintain stable performance during overclocking.