Back To Basics L5750A 65032 Instruction Manual
![Back To Basics L5750A 65032 Hot Drink Maker manual cover](/images/ZyiyncbcaTXRydkTXCCrtkmw/thumbs/thumb175x175.webp)
To clean the hot drink maker, fill the reservoir with equal parts of water and white vinegar. Run a full cycle without any coffee grounds or tea leaves. Afterwards, run two cycles with just water to rinse.
Ensure the appliance is plugged into a functioning outlet. Check the power cord for any visible damage. Inspect the main switch and make sure it is in the "On" position. If problems persist, contact customer support.
Verify that the water reservoir is properly seated and not overfilled. Check for any cracks or damage to the reservoir. Ensure the seals and gaskets are intact and properly aligned.
To descale, fill the water reservoir with a descaling solution or a mixture of water and citric acid. Run a complete brewing cycle without any coffee or tea. Follow up with two cycles of clean water to rinse.
Some noise is typical due to the boiling and brewing process. However, if the noise is unusually loud or sounds like grinding, check for obstructions or contact customer service for assistance.
This model does not have an adjustable brewing strength setting. You can manually adjust the strength by varying the amount of coffee or tea you use.
Yes, you can use it to heat water for other beverages like hot chocolate or instant soups. Ensure to clean the unit thoroughly afterwards to avoid flavor transfer.
Ensure the unit is clean and dry. Store it in a cool, dry place. It is recommended to keep it unplugged and with the lid open to prevent moisture buildup.
Ensure the water reservoir is not overfilled and the unit is preheated. Check if the heating element is functioning correctly. If the problem continues, contact customer support.
Filters should be replaced every 60 uses or every 2 months, whichever comes first, to maintain optimal performance and flavor quality.