Back To Basics L5735 SE2000 Instruction Manual
![Back To Basics L5735 SE2000 Smoothie Maker manual cover](/images/OwkDTDJSVboKrfJbccJCQqDj/thumbs/thumb175x175.webp)
To assemble the smoothie maker, start by placing the jar onto the base. Ensure it is securely in place. Attach the blade assembly to the bottom of the jar, then twist to lock. Finally, place the lid on top, ensuring the spout cap is closed.
Check that the power cord is plugged into a functioning outlet. Ensure that the jar is properly seated on the base and that the lid is securely closed. If the problem persists, inspect the power cord for damage or consult the user manual for further troubleshooting steps.
Disassemble the jar, lid, and blade assembly. Wash these parts in warm, soapy water. Rinse thoroughly and dry. Do not immerse the base in water; instead, wipe it with a damp cloth. Ensure all parts are dry before reassembling.
Ensure the blade assembly is tightly secured to the jar and the lid is properly sealed. Do not overfill the jar beyond the max fill line. Regularly check the condition of the gaskets and replace them if worn or damaged.
Unusual noises may indicate that the jar is not properly seated, the blade assembly is loose, or there are hard objects inside. Ensure all parts are correctly assembled and remove any foreign objects from the jar.
Yes, the smoothie maker can crush ice. For best results, use small ice cubes and start with the pulse function to break them down before blending continuously.
Replace the blade assembly if it shows signs of wear or damage, or if it becomes dull, which typically occurs after extensive use. Regular inspection is recommended to ensure optimal performance.
If the motor overheats, turn off the smoothie maker and unplug it. Allow it to cool for at least 15 minutes. Avoid overloading the jar and ensure proper ventilation around the base to prevent future overheating.
Disassemble the jar, lid, and blade assembly for storage. Ensure all parts are clean and dry. Store the unit in a cool, dry place. Keep the cord coiled and out of the way to prevent damage.
It is not recommended to blend hot liquids as the pressure build-up can cause the lid to dislodge. Allow hot liquids to cool before blending to ensure safety.