Back To Basics L5705 SIT10813CF Instruction Manual

To assemble the ice shaver, start by attaching the ice hopper to the base. Ensure it clicks into place securely. Next, insert the shaving blade by aligning it with the designated slot, then fasten it using the provided screws. Finally, attach the lid on top of the hopper.
First, ensure the device is properly plugged into a working outlet. Check the power cord for any visible damage. Make sure the safety switch, located under the lid, is engaged. If the problem persists, consult the user manual for troubleshooting tips or contact customer support.
Unplug the machine before cleaning. Remove the ice hopper and lid, then wash them with warm, soapy water. Use a damp cloth to wipe down the base, ensuring no water enters the motor housing. Allow all parts to dry thoroughly before reassembling.
It is recommended to use regular ice cubes or slightly crushed ice. Avoid using large blocks of ice or ice with impurities, as they may damage the blade or affect the performance of the machine.
The fineness of the shaved ice can be adjusted by turning the blade adjustment knob located near the blade compartment. Turn it clockwise for finer ice and counterclockwise for coarser ice. Experiment with different settings to find your preferred texture.
Excessive noise may be caused by the blade being dull or improperly installed. Check the blade for any visible damage or misalignment and adjust if necessary. If the noise persists, it might indicate a mechanical issue, and professional servicing may be required.
No, it is not recommended to add flavored syrups directly into the ice shaver, as they can clog the machine and affect its performance. Instead, pour syrups over the ice after it has been shaved.
Ensure the machine is completely dry and clean before storage. Store it in a dry, cool place, preferably in its original packaging or covered with a dust cover. Keep the cord coiled and secured to prevent damage.
Regularly clean the machine after each use to prevent buildup. Check the blade for sharpness and replace it if necessary. Ensure all moving parts are lubricated as per the user manual's instructions. Periodically check the power cord for any signs of wear.
Some vibration is normal due to the high-speed operation of the machine. However, excessive vibration could indicate an imbalance in the ice or a loose component. Ensure the ice is evenly distributed in the hopper and check all parts for secure attachment.