Ambiano WHB-13H 51215 User Manual
![Ambiano WHB-13H 51215 manual cover](/images/sVLTKRLunHOprgMpgvsnTMXM/thumbs/thumb175x175.webp)
To assemble the Ambiano WHB-13H 51215 Blender, first ensure all parts are clean and dry. Place the jug onto the base, ensuring it locks into place. Attach the lid securely, and insert the measuring cap into the lid if needed. Finally, ensure all components are aligned and secure before plugging in the blender.
Disassemble the blender by removing the jug, lid, and blades. Wash these parts with warm soapy water and rinse thoroughly. Use a damp cloth to wipe the motor base, taking care not to immerse it in water. Allow all parts to dry completely before reassembling.
Ensure the blender is properly plugged into a working power outlet. Check that the jug is correctly positioned on the base and the lid is securely fastened. Also, make sure the safety lock is engaged. If the issue persists, check the fuse or circuit breaker.
To prevent overheating, avoid running the blender continuously for extended periods. Allow it to rest between batches if blending large quantities. Ensure the vents on the motor base are not obstructed. If it overheats, unplug it and let it cool down before resuming.
It is not recommended to blend hot liquids as this can cause pressure to build up in the jug, potentially leading to spills or damage. Allow liquids to cool before blending, or use a specialized blender designed for hot liquids.
First, ensure the blender is properly assembled with the jug and lid securely in place. Check for any obstructions around the blades and remove them. If the motor is running but the blades are not rotating, the coupling may need to be inspected. Consider consulting the user manual or contacting customer support for further assistance.
Regular maintenance includes cleaning after each use, checking for wear and tear on blades, and inspecting the power cord for any damage. Periodically ensure the motor vents are clear of dust and debris. Perform a thorough inspection every few months or as needed based on frequency of use.
The maximum capacity of the blender jug is typically marked on its side. For optimal performance and safety, do not exceed this maximum fill line. Overfilling can result in spillage or reduced blending efficiency.
To reduce noise, place the blender on a stable, flat surface. Ensure the rubber feet are intact to minimize vibration. Blending smaller quantities and using lower speeds can also help. Additionally, placing a soft mat under the blender may help absorb sound.
Immediately turn off and unplug the blender. Check for any obstructions in the blades or motor vents. Let it cool down completely before inspecting for any visible damage to the motor or electrical components. If the issue persists, contact customer support or a qualified technician.