Alpine INE-W940E Owner's Manual

To update the firmware on your Alpine INE-W940E, download the latest firmware from the Alpine website onto a USB drive. Insert the USB into the unit and follow the on-screen instructions to complete the update.
If the touchscreen is unresponsive, try restarting the device by turning it off and back on. If the issue persists, check for any firmware updates. If the problem continues, contact Alpine support for further assistance.
Enable Bluetooth on your smartphone and set it to discoverable mode. On the INE-W940E, go to the Bluetooth settings and search for devices. Select your smartphone from the list and pair the two devices by following the on-screen instructions.
Ensure that the GPS antenna is properly connected and positioned with a clear view of the sky. Interference from tinted windows or other electronic devices can also affect the signal. If the issue persists, try resetting the GPS module through the device settings.
To reset the INE-W940E to factory settings, go to the settings menu, select 'System', and then 'Factory Reset'. Confirm your selection and wait for the unit to restart with default settings.
Yes, you can play video files from a USB drive. Ensure the video files are in a compatible format such as MP4 or AVI. Insert the USB drive into the unit and navigate to the video playback menu to select and play your files.
Access the audio settings by pressing the 'Audio' button on the main menu. From there, you can adjust the equalizer settings, balance, fader, subwoofer level, and other audio preferences to suit your taste.
If the unit does not power on, check the main power connection and ensure the fuse is intact. Verify that the vehicle’s ignition is on and that any power settings on the unit are correctly configured. If the issue persists, it may require professional servicing.
To improve radio reception, ensure that the antenna is fully extended and properly connected. Avoid placing electronic devices near the antenna to reduce interference. If reception issues continue, consider installing a signal booster.
Connect the rear-view camera's video output to the dedicated camera input on the INE-W940E. Power the camera using the reverse light circuit so it activates when the vehicle is in reverse. Configure the camera settings in the system menu for optimal performance.