Alba WO274 543/4767 Instruction Manual
![Alba WO274 543/4767 Speaker manual cover](/images/qQPUEPHqGeKKNVYnzlQntmeR/thumbs/thumb175x175.webp)
To pair your speaker with a Bluetooth device, first ensure the speaker is turned on. Then, activate the Bluetooth feature on your device and search for available devices. Select 'Alba WO274' from the list and connect.
If your speaker is not turning on, check if it is fully charged. Connect it to a power source using the provided charger. If it still does not turn on, try resetting the speaker by holding the power button for 10 seconds.
To reset your speaker to factory settings, press and hold the power button and the Bluetooth button simultaneously for 5 seconds until you hear a confirmation tone.
Ensure the speaker is in pairing mode by checking if the Bluetooth indicator light is flashing. Make sure your device's Bluetooth is on and within range. If issues persist, try restarting both devices.
To update the firmware, visit the Alba website and download the latest firmware version. Connect your speaker to your computer via USB and follow the provided instructions to complete the update.
Use a soft, dry cloth to gently wipe the exterior of the speaker. Avoid using harsh chemicals or abrasive materials. If necessary, slightly dampen the cloth with water for tougher spots.
Yes, you can use the speaker while it is charging. Connect it to a power source, and it will continue to function normally.
First, check the volume levels on both the speaker and the connected device. Ensure the speaker is not muted. If there's still no sound, try reconnecting the speaker to the device.
You can connect to a non-Bluetooth device using an auxiliary cable. Plug one end into the speaker’s AUX port and the other into the device’s headphone jack.
The Alba WO274 speaker provides up to 10 hours of playtime on a full charge, depending on the volume level and audio content.