Alba 4299570 Instruction Manual
![Alba 4299570 Micro System manual cover](/images/WnAabnWhxcGlpeIlOHNpARIm/thumbs/thumb175x175.webp)
To connect your Alba 4299570 Micro System to a Bluetooth device, ensure the system is in Bluetooth mode. Then, enable Bluetooth on your device and search for available devices. Select 'Alba 4299570' from the list to pair.
First, ensure the volume is not muted and is at an audible level. Check all cable connections, and ensure the system is set to the correct input source. If issues persist, perform a factory reset.
To perform a factory reset, turn off the system, then press and hold the 'Power' and 'Volume Up' buttons simultaneously for 10 seconds until the system restarts.
Yes, you can play music from a USB device. Simply insert the USB into the USB port on the micro system, and select the USB mode on the system to start playing.
Use a soft, dry cloth to clean the exterior. Avoid using harsh chemicals. For optimal performance, keep the system in a dust-free environment and avoid exposure to moisture.
Ensure the FM antenna is fully extended and positioned vertically. Try repositioning the micro system to reduce interference and improve signal reception.
Press the 'Clock' button on the system or remote control. Use the 'Skip' or 'Tune' buttons to set the hour and minutes, and press 'Clock' again to confirm.
Check that the system is properly plugged into a working power outlet. If the problem persists, try using a different power outlet or replacing the power cable.
Use the 'Source' button on the system or the remote control to cycle through available input sources, such as CD, USB, Bluetooth, and FM radio.
First, replace the batteries in the remote control. Ensure there are no obstructions between the remote and the system. If it still doesn’t work, check for any damage to the remote control.