Alba DAB 557/4902 Instruction Manual
![Alba DAB 557/4902 Radio manual cover](/images/mYYWmoXAdHHjEWvMnMjsnlWO/thumbs/thumb175x175.webp)
To set up your Alba DAB 557/4902 Radio, plug it into a power source and extend the antenna fully for the best reception. Turn the radio on and it will automatically start a full scan for available DAB stations. Use the tuning knob to navigate through the stations.
Ensure that the antenna is fully extended and positioned vertically. Try moving the radio closer to a window or higher up in the room. Avoid placing the radio near other electronic devices that may cause interference.
Check that the radio is plugged into a working power outlet. Ensure the power cable is securely connected to the radio. If the radio still does not turn on, try using a different power outlet or cable.
To store a preset station, tune to your desired station and press and hold the preset button until the display indicates the preset number. You can store multiple stations and access them by pressing the preset button briefly.
Check the volume level and make sure it is turned up. Verify that headphones are not plugged into the headphone jack. Ensure the radio is not muted and that the correct source is selected.
To reset the radio, press and hold the Menu button until the system settings appear. Navigate to the 'Factory Reset' option and select it. Confirm your choice to reset the radio to its original settings.
Yes, the Alba DAB 557/4902 Radio can operate on batteries. Open the battery compartment and insert the required batteries according to the polarity markings. Ensure the batteries are fresh for optimal performance.
Press the Mode button on the radio to toggle between DAB and FM modes. The display will indicate the current mode. Use the tuning controls to navigate stations in the selected mode.
To clean the radio, use a soft, dry cloth to wipe the exterior. Avoid using water or cleaning agents. Regularly check the antenna for dust and extend it fully to ensure optimal performance.
The Alba DAB 557/4902 Radio typically does not require firmware updates. However, if available, updates would be provided by the manufacturer. Refer to the user manual or the manufacturer's website for instructions and availability.