Acura ZDX Operating Controls 2013 Manual
![Acura ZDX Operating Controls 2013 SUV manual cover](/images/kUWBXxxoHPsUtOXTXdKTjXNm/thumbs/thumb175x175.webp)
To adjust the steering wheel, locate the lever under the steering column. Pull it down to unlock the steering wheel, adjust it to your preferred position, and push the lever up to lock it in place.
Check if the key fob battery is low and replace it if necessary. Ensure the brake pedal is fully depressed while attempting to start the vehicle. If the issue persists, consult your dealer.
To set the cruise control, press the 'CRUISE' button on the steering wheel. Accelerate to your desired speed, then press the 'SET' button. Adjust the speed using the '+' and '-' buttons.
Access the vehicle's 'Phone' menu, select 'Bluetooth Setup', and choose 'Add a New Device'. Ensure your phone's Bluetooth is enabled and select 'Acura HandsFreeLink' from the phone's Bluetooth menu to pair.
First, check if the navigation disc is correctly inserted. If the problem persists, try resetting the system by turning off the vehicle and restarting it. Consult the manual for system updates or contact a dealer for assistance.
Open the glove box and remove the damper by unhooking it. Push in the sides of the glove box to release it, then remove the filter cover. Slide out the old filter and insert the new one, ensuring the airflow direction matches the arrow on the filter.
Navigate to the 'Settings' menu on the multi-information display, select 'Vehicle Settings', then 'TPMS Calibration'. This will show the current tire pressures. For accurate readings, check when tires are cold.
Press the 'SETUP' button, select 'System Settings', then 'Language'. Choose your preferred language from the list and confirm the selection. The system will update to display the new language.
For the 2013 Acura ZDX, it is recommended to check and replace the transmission fluid every 30,000 to 60,000 miles, depending on driving conditions. Always refer to the owner's manual for specific guidelines.
Turn the ignition to the 'ON' position without starting the engine. Press the 'SEL/RESET' button until the oil life indicator is displayed. Hold the 'SEL/RESET' button for 10 seconds until the indicator resets to 100%.