Acura RDX Wiper Control 2016 Manual

To activate the rain-sensing wipers on your 2016 Acura RDX, ensure that the wiper lever is in the 'Auto' position. The sensor will automatically adjust the wiper speed based on the intensity of the rain.
If your wipers are streaking, it may be time to clean or replace the wiper blades. Clean the blades with a soft cloth and a glass cleaner. If streaking persists, consider replacing the blades.
To replace the wiper blades, lift the wiper arm away from the windshield, press the release tab on the blade, and slide it off the arm. Attach the new blade by sliding it onto the arm until it clicks securely in place.
If the wipers are not working, check the wiper fuse in the fuse box. If the fuse is intact, inspect the wiper motor and wiring for any visible damage. If necessary, consult a professional technician for further diagnostics.
It is recommended to replace the wiper blades every 6 to 12 months, or sooner if you notice reduced visibility during rain due to streaking or skipping.
Yes, you can adjust the sensitivity of the rain sensor using the wiper control lever. There is a rotary switch on the lever to increase or decrease sensitivity.
Use a high-quality windshield washer fluid that is designed to remove dirt and grime. During winter, opt for a fluid that contains antifreeze to prevent freezing on the windshield.
Noisy wipers may be due to dirt on the blades or windshield. Clean both with a glass cleaner. If noise persists, check the alignment and pressure of the wiper arms, and replace the blades if needed.
A potential cause could be a fault in the wiper motor or a blockage in the wiper linkage. Inspect the wiper motor and linkage for debris or damage, and clear any obstructions.
Regularly clean the wiper blades and windshield to prevent buildup of dirt. Check for any signs of wear or damage on the blades, and replace them as needed to ensure optimal performance.